[MJ999]

I tried to downgrade ps3 slim, with JSD-001 MOBO with spansion nor, everything was ok, after updating it with KMEAW 3.55 the console bricked. I connected the progskeet again to debrick it , but the console wont stay on. Can ya help me >>

And, I did the 3.3v and R8 Closed and R7 open ( with switch ), the computer wont detect progskeet
I also did the ATX power supply method, 3.3 and the ground from the atx to the ps3, that also not working. the proskeet is showing up but when I click DUMP CFI it fails..

[keano]

I can't help fix it but if you are stuck and in the UK I know a guy who can, just as long as you have the bios dump

[MJ999]

Buddy,
Unfortunately, I'm not in UK.

[Bigbones87]

Racer0018 is really good at unbricking and downgrading. Look him up. He is USA and does a really professional job at everything he touches. He definitely knows his stuff, and progskeet is his specialty.

[stdule]

you use the 360 nor clip? Using NOR flasher Progskeet

Method 1 (with R7 switch and R8 closed):

1. Unplug the PS3 powercable from the back
2. Open up progskeet flashing software (use latest) and on Common tab: select the flash you have @ Presets
3. Set the R7 switch to "off"
4. Plug the PS3 powercable back in and Power on the PS3
5. Wait 10 seconds and set the R7 switch to "on" to power progskeet (sometimes shorter time is needed)
6. Progskeet will be recognised and you can now go ahead and dump
For normal console operation (e.g. after you dumped, flashed/downgraded it):
you need switch to "on" (R7 closed) and progskeet USB disconnected.

Method 2 (with R7 open / R8 closed):

1. Remove USB cable from your PC
2. Open up progskeet flashing software (use latest) and on Common tab: select the flash you have @ Presets
3. Power on PS3 and wait 10 seconds (sometimes shorter time is needed)
4. Plug in the USB cable to your PC
5. Progskeet will be recognised and you can now go ahead and dump
For normal console operation (e.g. after you dumped, flashed/downgraded it):
you need to disconnect the USB cable to your PC

[baileyscream]

Originally Posted by stdule you use the 360 nor clip? Method 1 (with R7 switch and R8 closed): Method 2 (with R7 open / R8 closed):

this wont work on his as its a de-hash fail "soft brick"

Originally Posted by MJ999 I tried to downgrade ps3 slim, with JSD-001 MOBO with spansion nor, everything was ok, after updating it with KMEAW 3.55 the console bricked. I connected the progskeet again to debrick it , but the console wont stay on. Can ya help me >>

go back to my ultimate fool proof guide HERE and see my reply.
this is an easy fix

and stay to one thread when you need help. posting here & there the same message is not going to get you anywhere.

and as you posted here but didnt put a link to my thread as the tut you followed has not helped ppl here trying to help you to get a propper idea of the fault that you now have.

so next time stay in one thread and wait for an answer. also you know you can message me as you have during your first downgrade.