[Freesty]

i try everything. this 10.1.1.2 is when i connect ps3 with pc directly with cross cable.
i try with normally network settings but nothing help.

[Caddyroo]

Originally Posted by svenmullet Yeah, I couldn't get MM to work with the EID0 stuff, so I made a guide (based on this) which substitutes Jailcrab's Preloader. I just converted my NAND-based CECHG01 to DEX, so it should work for any NAND user. I basically followed JayDee78's guide to the letter, except the MM stuff. Here you go, and play safe. Attachment 1502

Great stuff mate ! Hopefully this won't brick as others have said it may do, do you know any others who have followed this guide ?

[cadaveros]

Hi There, in final step (CEXtoDEX)my DEX-flash.EID0.NORBIN and my flash_stor_35500.bin not have same MD5. in c2d program DEX-flash.EID0.NORBIN and flash_stor_35500 are the same MD5,i install DEX-flash.EID0.NORBIN (create by c2d which has the same MD5) in multiman,restat ps3,and try instal DEX FW but give an error...and cant install.i not try install DEX-flash.EID0.NORBIN created by CEX2DEX because MD5 check is wrong and may brick my ps3 i think. my question is, your DEX-flash.EID0.NORBIN and flash_stor_35500 are the same MD5 or not? thanks for the tutorial.

[gamebeatter]

when i go to do the dump_rootkey 192.168.1.XXX i get nothing but
Connecting to IP ADDRESS HERE...ok

[cadaveros]

Originally Posted by gamebeatter when i go to do the dump_rootkey 192.168.1.XXX i get nothing but Connecting to IP ADDRESS HERE...ok

try open main.cpp in dump_rootkey folder and put your ps3 ip in //#define PS3HOST "192.168.x.xxx" and dump_rootkey.exe run in admin mode, and run cmd(DOS) in admin mode too,i have this problem and this fix to me.
before connect make a test in DOS: ping 192.168.1.1 for exemple.

[gamebeatter]

Originally Posted by cadaveros try open main.cpp in dump_rootkey folder and put your ps3 ip in //#define PS3HOST "192.168.x.xxx" and dump_rootkey.exe run in admin mode, and run cmd(DOS) in admin mode too,i have this problem and this fix to me. before connect make a test in DOS: ping 192.168.1.1 for exemple.

did what you said, still got the connecting ok. am using the MFW from the thread the OP used, and heres my ping results

Pinging 192.168.1.112 with 32 bytes of data:
Reply from 192.168.1.114: Destination host unreachable.
Reply from 192.168.1.114: Destination host unreachable.
Reply from 192.168.1.114: Destination host unreachable.
Reply from 192.168.1.114: Destination host unreachable.

Ping statistics for 192.168.1.112:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

[playerkp420]

Do you have your PS3 connected to your router via ethernet cable? Don't use WiFi.
After connecting with the cable, go to network setting and setup and test the connection.

[gamebeatter]

Originally Posted by playerkp420 Do you have your PS3 connected to your router via ethernet cable? Don't use WiFi. After connecting with the cable, go to network setting and setup and test the connection.

i forgot about it and re did it with a setup of wired and it worked!! but now i gotta figure out how to make the file with no extension

[playerkp420]

When you save the file, don't put .bin at the end.

[gamebeatter]

Originally Posted by playerkp420 When you save the file, don't put .bin at the end.

when i dump it it automatically comes out as a .bin