[Annelies]

Originally Posted by rocknard thx a lot. Can i revert to normal mode?? o FSM is activated when i execute in xmb?? Is't dangerous for my ps3?? brick?

Make sure to follow these instructions very carefully when entering Factory/Service Mode with FSM Tool v0.2.

Entering Factory/Service Mode:

1. Install the appropriate package file for your system: FactoryServiceMode.gnpdrm.pkg for CEX and
FactoryServiceMode.pkg for DEX. Leave the USB Flash Drive in the PS3.

2. Run the application and listen for a single beep and you should enter Factory/Service Mode automatically.

Exiting Factory/Service Mode:

1. Rename and copy the file named Lv2diag_exit.self on the root of your USB flash drive to Lv2diag.self
Note: This release simply exits FSM. Do NOT use the RSOD Lv2Diag released earlier unless you have RSOD.

2. Place the USB Flash Drive in the USB slot furthest to the right side of the PS3.

3. Restart the PS3. You should be out of Factory/Service Mode.

Is it dangerous for your PS3?

If you manager to brick your PlayStation 3 when entering Factory/Service Mode, you have one option unless you own a hardware flasher. You could use this "brick fix" released by Gitbrew: http://www.ps3hax.net/2011/10/releas...-55-and-lower/

If that fix does not work, you will be in a tight predicament and will need to buy a hardware flasher such as E3 Flasher.

[xXRagnarokXx]

Why the controler not working?

[Annelies]

Originally Posted by uncharted angel how to run games ?????? where i replace dev-flash???? what is factory mode?????

You can only run retail titles. (Official releases purchased from stores such as Gamestop)

You can find your Dev_Flash folder via FTP. It is a very sensitive folder so take extreme caution when tampering with it's contents.

Factory/Service Mode is a mode Sony uses when doing corporate-business stuff. I don't know.It's just a mode that's there. You need to enter it to play PS2 titles.

[Cheesethief]

I love how this post says "All PS3's." The compatibility is identical to Cobra, so if you have a non-bc console, you will not be getting much functionality at all.

[xXRagnarokXx]

The controlle is not working

[Atrion]

Originally Posted by xXRagnarokXx The controlle is not working

Haven't tried this yet myself but perhaps you will need to connect it via the cord...

[xXRagnarokXx]

I Already try it with usb i have 3 controller not of them works

[rocknard]

Originally Posted by Annelies Make sure to follow these instructions very carefully when entering Factory/Service Mode with FSM Tool v0.2. Entering Factory/Service Mode: 1. Install the appropriate package file for your system: FactoryServiceMode.gnpdrm.pkg for CEX and FactoryServiceMode.pkg for DEX. Leave the USB Flash Drive in the PS3. 2. Run the application and listen for a single beep and you should enter Factory/Service Mode automatically. Exiting Factory/Service Mode: 1. Rename and copy the file named Lv2diag_exit.self on the root of your USB flash drive to Lv2diag.self Note: This release simply exits FSM. Do NOT use the RSOD Lv2Diag released earlier unless you have RSOD. 2. Place the USB Flash Drive in the USB slot furthest to the right side of the PS3. 3. Restart the PS3. You should be out of Factory/Service Mode. Is it dangerous for your PS3? If you manager to brick your PlayStation 3 when entering Factory/Service Mode, you have one option unless you own a hardware flasher. You could use this "brick fix" released by Gitbrew: http://www.ps3hax.net/2011/10/releas...-55-and-lower/ If that fix does not work, you will be in a tight predicament and will need to buy a hardware flasher such as E3 Flasher.

thx for the acclaration. the link of githbrew don't work. where can i download the .pup 3.55 and Lv2diag??

[popman]

why do you need service mode?
http://www.ps3devwiki.com/files/Othe...c/boot_ps2.pkg

[Atrion]

Do you know what the service mode changes that allows it to work with it but not from the normal running mode?