[maxkanick]

Originally Posted by Bigbones87 Tht is a shame. Another one bites the dust. And it was fixable all the way till you flashed other bios. That is why it is better to research before acting. Owell

this is the first time
in the next time will never do that

[Bigbones87]

It's cool man. It was your ps3 to ruin. Sometimes you have to screw stuff up to learn. Part of it. Trial and error.

[maxkanick]

Originally Posted by Bigbones87 It's cool man. It was your ps3 to ruin. Sometimes you have to screw stuff up to learn. Part of it. Trial and error.

my ps3 is bricked but i not mean i will put it to a dump
i will research the way to unbrick it again
for now i have no idea and i am tire

[Bigbones87]

If you flashed another consoles bios, I am sorry to say, there will never be a fix for it. You are talking 16 million byte bios. I am pretty sure not even Sony can help you, since the per console data is now gone. I am not telling you to trash it, I am saying it goes on eBay for parts.

[knowlogy]

my ps3 brick no orange light no hd activaty no display CECH 3004 B
but i flash it back using my bios dump still not working i cut the A/B and sold the A still no working but i have errors on my bios dump please help me

[playerkp420]

Originally Posted by knowlogy my ps3 brick no orange light no hd activaty no display CECH 3004 B but i flash it back using my bios dump still not working i cut the A/B and sold the A still no working but i have errors on my bios dump please help me

You can not downgrade cech-3004b. You will brick when attemping.
If you solder a wire from sbe to tristate and flash your original bios in flash fun mode. You should be back to the original state.
This is assuming you have a good backup. I don't think there is anyway to fix, if you don't have a good backup. Because you would not be able to fix by downgrading, cause you can't downgrade.

You should of done more research. It is well known that 3000 series is not downgradable.
You should of known also not to flash anything, without an error free backup.

[khaledsomico]

please help

my ps3 was rogero 3.7 and try to update it to kemaw3.55 to use true blue ,i do it trough the recovery mode but it is bricked,i have e3 flasher and my flash dump which i use it before,i flash it and no errors but still no power in the usb to run the jb.
i try many different ways but no success.

please help me. thanks.

[playerkp420]

Originally Posted by khaledsomico please help my ps3 was rogero 3.7 and try to update it to kemaw3.55 to use true blue ,i do it trough the recovery mode but it is bricked,i have e3 flasher and my flash dump which i use it before,i flash it and no errors but still no power in the usb to run the jb. i try many different ways but no success. please help me. thanks.

If you only have your original dump, from before you downgraded.

Use Rogero's PS3 Nor dump patcher, to patch the dump.
Put only the dump (renamed to bkpps3.bin) on your sd card.
Flash it to your PS3.
After it has completed, cut power from PS3.
Put all switches down.
Insert downgrade dongle in right most USB port.
Then continue with downgrade procedure, power then eject, blah, blah, blah.

After you are back to Rogero, Follow the guide below from the spoiler Qa flag. This will allow you to install any cfw you like.

Good luck.

[khaledsomico]

dear mr.playerkb thank you for help ,i already did it but still the problem existing.patcher pass successfully and flashing also done without error but i don't have power in the usb.

please comment.

[playerkp420]

Originally Posted by khaledsomico dear mr.playerkb thank you for help ,i already did it but still the problem existing.patcher pass successfully and flashing also done without error but i don't have power in the usb. please comment.

Since you have flashed the patched bios successfully, you can uninstall the flasher. Then you should have power to your usb ports again.

Or if you don't want to uninstall the flasher, you can just unplug the ribbon from the e3 flasher card.