[amir3009]

Idk if theirs a certian type of wire you solder to the SBE and PAO Tristate if so can you tell me


Thankyou

[playerkp420]

Originally Posted by amir3009 Idk if theirs a certian type of wire you solder to the SBE and PAO Tristate if so can you tell me Thankyou

I use 24 gwg wire. A little smaller or bigger will work also.

[alexander2305]

PHAT CECHL04 8c 4.11 Ver-001 Motherboard,E3 Flasher fixed with Tape and put something on to make higher,to have really hard pressure on.

Hello, i have the same problems like many others.
I was on 4.11 Installed e3 Flsher made a Backup(this is 100% OK,tested from other guys),saved it like it is,patched it, wanted to make restore but i Made it in FlashFun and so I bricked the PS3.
I solder the SBE/Tristate Point,put the patched Backup back on E3 Flasher ,worked.But Now when i turn on I should get a TVor HDD Signal BUT NOTHING i get no signal.
I made 1000 different tut. but i dont get signal,and when i put my PB2Dongle in usb and make On + Eject (3xpiep) the dongle doesnt start.
I also made the tut from hack but this tut is for guys who dont was on newer than 3.55 they want a one key downgrade.
Does anyone have some Infos what can it be that there is no Signal???

[dredred334]

where do u find the soldering point in fat model?

[playerkp420]

Originally Posted by dredred334 where do u find the soldering point in fat model?

Look here.

[knowlogy]

please can some one help me my ps3 brick no video no audio no orange light i flasher fun with my bios and still not work i cut the a/b still help me
************* [ - Post Merged - ] *************
please can some one help me my ps3 brick no video no audio no orange light i flasher fun with my bios and still not work i cut the a/b still help me

[SONOFREAPER]

i would like to thankyou mate u saved my ass from a brick cheers buddy

[xtsgeditz]

Hey dies aneyone have a cech 20021a (something like that it's the 120gb slim) with an e3 flasher installed and WORKING bios on 4.21 or 3.55 fm as I've bricked my ps3 during the downgrade process
Plse respond ASAP

[playerkp420]

Originally Posted by xtsgeditz Hey dies aneyone have a cech 20021a (something like that it's the 120gb slim) with an e3 flasher installed and WORKING bios on 4.21 or 3.55 fm as I've bricked my ps3 during the downgrade process Plse respond ASAP

You can't use a dump from a different PS3, to unbrick yours. You need your dump.
If you don't have one, make one and patch it, and flash and downgrade.

[xtsgeditz]

Is there a tut on how to do this because I'm kinda new to all this e3 stuff and also can u use an e3 flasher more than once