[playerkp420]

@cfcolaco

I noticed this

1.1 - Open your bkps3.bin in HxD 1.2 - select analysis > statistics > select your file 1.3 - mouse over the blue bars and check if: 00's - between 18.71% - 29.01% FF's - between 10.42% - 10.48% rest - Above 0.5%

rest should be below not above 0.5%
Source

[cowboy61]

Originally Posted by playerkp420 @cfcolaco I noticed this rest should be below not above 0.5% Source

Hey would it be possible for you to check my dump and if its good to go. Would appreciate it?

Model CECH 2004A Slim 120GB

http://www.mediafire.com/?78l9d799163az39

[playerkp420]

Originally Posted by cowboy61 Hey would it be possible for you to check my dump and if its good to go. Would appreciate it? Model CECH 2004A Slim 120GB http://www.mediafire.com/?78l9d799163az39

Your dump is good.

[cowboy61]

Originally Posted by playerkp420 Your dump is good.

Excellent, wish me luck . As soon as i flash this back (after ive used Rogero nor dump app ) must i install my Blu ray and then start the downgrade process to Rogero

[playerkp420]

Originally Posted by cowboy61 Excellent, wish me luck . As soon as i flash this back (after ive used Rogero nor dump app ) must i install my Blu ray and then start the downgrade process to Rogero

If you are following my guide below, you don't have to install the blu-ray drive until after you downgrade to Rogero. But you will before you start the spoiler "Qa flag".
Rogero's cfw has the bd check removed, so you can downgrade without it.
But to run the apps toggle qa and condor updater, you will need the bd connected.

[cowboy61]

Originally Posted by playerkp420 If you are following my guide below, you don't have to install the blu-ray drive until after you downgrade to Rogero. But you will before you start the spoiler "Qa flag". Rogero's cfw has the bd check removed, so you can downgrade without it. But to run the apps toggle qa and condor updater, you will need the bd connected.

Well it was short lived my roll. Tried to flash it and my clip came lose. Booted up the console and it YLOD. I soldered the sbe and nor trans and it boots to a black screen but doesn't YLOD. Should I reflash my dump via flash fun in order to get it working. If I select ps3 mode it YLOD

[nzie]

Originally Posted by cowboy61 Well it was short lived my roll. Tried to flash it and my clip came lose. Booted up the console and it YLOD. I soldered the sbe and nor trans and it boots to a black screen but doesn't YLOD. Should I reflash my dump via flash fun in order to get it working. If I select ps3 mode it YLOD

Patch your dump. Switch to 100000 (flash fun) and flash the patched one.

[cowboy61]

Originally Posted by playerkp420 If you are following my guide below, you don't have to install the blu-ray drive until after you downgrade to Rogero. But you will before you start the spoiler "Qa flag". Rogero's cfw has the bd check removed, so you can downgrade without it. But to run the apps toggle qa and condor updater, you will need the bd connected.

@nzie
Hey guys, just want to say thanks for all the help. I really appreciate it, after troubles and more troubles, i finally managed to downgrade my slim with 4.11, it was all about the CLIP........the tutorial was pretty simple and easy to follow, since i was doing it without the blu ray and just needed that extra pressure on the clip, hands are sore from pressing

[cfcolaco]

@playerkp420

Originally Posted by playerkp420 @cfcolaco I noticed this rest should be below not above 0.5% Source

Hey guyz!

Fixed! thanks for the Correction!

sorry for not giving support about this thread, but i've stoped downgrading consoles, i'm not using ps3 anymore ...

however i feel gr8, by knowing this thread have been helping people!

Thanks @playerkp420 by including my tutorial with your downgrade tutorial =)
feel gr8 about that! because it was the tutorial that i always used as reference xD

[d8yle]

removed...