[zhuxi]

Hey, baileyscream.
With this guide, can i recovery the waninkoko nand brick console?
Is the injectus is necessary for the progskeet? Or only progskeet, band adapt & 1 nand x360 clip is enough?
************* [ - Post Merged - ] *************
Hey, baileyscream.
Or can you provide a waninkoko brick recovery guide for us if you are free?

[baileyscream]

Originally Posted by v8s10 hidden the big post I have downgraded to 2.30, 3.15, 3.41, 3.50 (all possible remarry firmwares) and tried the remarry...still "Prohibited" message. I also tried pulling the bd drive out of a never-downgraded 3.55 nand PS3 with working bluray movie play back, remarried it to the downgraded PS3, and transferred the known working DRL from the working PS3 to the downgraded one, and STILL got the "Prohibited" message. All the tests I tried were done on one nand PS3 that was QA flagged right after downgrading, I never bothered to try to restore playback on any of the other nand PS3's that I downgraded. I don't really care if I ever get br movie playback restored on this PS3, it's just more of a learning/curiosity thing for me, and if I ever figure it out, I'll be sure to let you know. I've never really followed any of the remarry threads too much so I'm unsure if there are any others that have lost playback from a hardware downgrade. Also, IIRC, I think I read somewhere quite a while back, that if there is too much tampering with DRL/HRL, br movie playback is permanently disabled, but can't find where I read that. If thats true then its likely why I have never been able to get it to work.

i have come across this in the wiki. HERE

i havent been able to re-produce your fault as yet but i will try again with the next phat i get in.
************* [ - Post Merged - ] *************

Originally Posted by zhuxi Hey, baileyscream. With this guide, can i recovery the waninkoko nand brick console? Is the injectus is necessary for the progskeet? Or only progskeet, band adapt & 1 nand x360 clip is enough? ************* [ - Post Merged - ] ************* Hey, baileyscream. Or can you provide a waninkoko brick recovery guide for us if you are free?

YOU NEED THE INJECTUS TO UPDATE THE BITSTREEM IF YOU USE THE NAND CLIPS

& i will check on ther wiki when i get 5 mins about the waninkoko brick fix

or you could take alook and let us know.

just search waninkoko on the wiki HERE

[zhuxi]

Originally Posted by baileyscream i have come across this in the wiki. HERE i havent been able to re-produce your fault as yet but i will try again with the next phat i get in. ************* [ - Post Merged - ] ************* YOU NEED THE INJECTUS TO UPDATE THE BITSTREEM IF YOU USE THE NAND CLIPS & i will check on ther wiki when i get 5 mins about the waninkoko brick fix or you could take alook and let us know. just search waninkoko on the wiki HERE

I have searched for a spanish website about fixed waninkoko v1 brick by infectus.

But the guide is not ultimate fool proof. So it's not easy for me to understand. Could you help do a favor on it?

Or you made a waninikoko v1 brick and fixed it for an guide.

http://www.ps3 news.com/forums/ps3-guides-tutorials/how-fix-waninkoko-ps3-cfw-bricked-consoles-116966.html

[starmos]

thnaks for fast replay baileyscream i will wait to upload more pictures of how you solder infectus to proogskreet ps3 mother bord and switsh to proogskreet

and when i download the picture is very blury when i try to get it larger

[baileyscream]

hidden E3 Flasher : duel boot.
step 1

http://s1176.photobucket.com/albums/...t=MOV01667.mp4
thanks to @Taigerr for permission to do this with his ps3

let me know if you can access it.

[jamesnesc709]

I found some dead or Forbidden links . can someone fix it please .
http://www.ps3devwiki.com/files/flas...ams_110805.rar
http://www.ps3devwiki.com/files/flas.../toggle_qa.pkg
http://www.ps3devwiki.com/files/flas...et_qa_flag.pkg
http://ps3devwiki.com/files/firmware...5/PS3UPDAT.PUP
http://www.ps3devwiki.com/files/lv2d...1/Lv2diag.self
http://www.ps3devwiki.com/files/flas...0downgrade.rar
http://www.ps3devwiki.com/files/firm...ccess_NoBD.PUP

[Bigbones87]

@baileyscream I went to go install rogero v3.4 over 3.55 ofw today. When I went to go download the .pup from ps3devwiki, it said rogero v3.4 nobd pup. I didn't think I wanted a no bd pup because I have a working bd drive. Then I noticed that the v3.1 I have on my slim is also a no bd pup but the bd drive on it works fine. So my question, even though it is a no bd pup, it will still let you use a bd drive? I guess it justs bypasses the check for a bd drive while updating but it doesn't disable the bd drive altogether? If so, that is good info for me to know for future reference. Thanks for your response.

[JustThatDude]

Originally Posted by Bigbones87 @baileyscream I went to go install rogero v3.4 over 3.55 ofw today. When I went to go download the .pup from ps3devwiki, it said rogero v3.4 nobd pup. I didn't think I wanted a no bd pup because I have a working bd drive. Then I noticed that the v3.1 I have on my slim is also a no bd pup but the bd drive on it works fine. So my question, even though it is a no bd pup, it will still let you use a bd drive? I guess it justs bypasses the check for a bd drive while updating but it doesn't disable the bd drive altogether? If so, that is good info for me to know for future reference. Thanks for your response.

Your correct Rogero does have a noBD but doesn't effect your bd as it just bypasses the check in order to update

[jamesnesc709]

can someone fix the files i found dead from the first page please ???

[PS3BOI]

Originally Posted by baileyscream well you need to read the first post. you need a progskeet or a TEENSY++ or an E3 FLASHER ************* [ - Post Merged - ] ************* finaly figured out a the correct way to "instant" duel boot with the E3 thats taken me 3 full days with no sleep with no results and the best part of today to actually get it right comming soon E3 FLASHER DUEL BOOT guide then soon after E3 MOD how to "hide" the E3 and have just 1 switch (for switching between OFW & CFW) showing and use the ps3's hdd port to fast swap should i post the E3 MOD in this guide or do a new thread?

Thank you. Do you think in the future, downgrade with just Amaze Break would be possible?