[baileyscream]

Originally Posted by MHMProSoft Hi everyone... i get the dump & validate it & all is ok & i have good dump. erase completed. now on flashing give me flashing verification failed. i tested : win 7 32 & 64 latest winskeet+winusb/winskeet 111004+libusb0 winskeet 111004 + libusb0+winxp 32 slow poke & ... some time i got many failed in verification. can anyone help me? progskeet 1.1 with wiring.

good chance a wire is off someware.
are you doing NAND or NOR?

if NOR can you still do "dump cfi"

[MHMProSoft]

Originally Posted by baileyscream good chance a wire is off someware. are you doing NAND or NOR? if NOR can you still do "dump cfi"

dump cfi is ok.
all wire is ok too.
in the irc told me use winskeet 111004 libusb0 & winxp 32 ...
but my problem is solved with my method for spansion p chip :
Winskeet : 111205
Driver : WinUSB Latest
OS : Win 7 32
Default Common Config For spansion p chip
Nor Setting : Single Word Program - Ready Triggered Timing
Flashing Ok
Verification Ok.
---------------
After that turn the ps3 & it turn on normally & fully working.
after that i turn of ps3 with controller.
now when i turn it on it will be turn off after 0.3 sec.
----------------------------------------------------------
i have 2 ps3 with this problem.
this is sofware mode fail like break
or hardware fail ?
---------------------------------
anotherps3 that i have is not downgraded console & not open in any time.
thanks for help.

[baileyscream]

[QUOTE=MHMProSoft;431762]***snip****
but my problem is solved with my method for spansion p chip :
Winskeet : 111205
Driver : WinUSB Latest
OS : Win 7 32
Default Common Config For spansion p chip
Nor Setting : Single Word Program - Ready Triggered Timing
Flashing Ok
Verification Ok.
---------------
****snip****QUOTE]

so "static timing" did not work for you? but "ready trigger timing" did work?

or did you not set "static timing"

just trying to clear that bit up. as i will update the guide

[MHMProSoft]

[QUOTE=baileyscream;431802]

Originally Posted by MHMProSoft ***snip**** but my problem is solved with my method for spansion p chip : Winskeet : 111205 Driver : WinUSB Latest OS : Win 7 32 Default Common Config For spansion p chip Nor Setting : Single Word Program - Ready Triggered Timing Flashing Ok Verification Ok. --------------- ****snip****QUOTE] so "static timing" did not work for you? but "ready trigger timing" did work? or did you not set "static timing" just trying to clear that bit up. as i will update the guide

no.
i tested all in your guide & set static timing.
but get verification error.
but "ready trigger timing" did work? = YES
-------------
can you help me on current problem?

[baileyscream]

Originally Posted by MHMProSoft --------------- After that turn the ps3 & it turn on normally & fully working. after that i turn of ps3 with controller. now when i turn it on it will be turn off after 0.3 sec. .

sorry i missed this bit.

does it flash the red light when it turns off?
do you still have the progskeet connected?

[MHMProSoft]

Originally Posted by baileyscream sorry i missed this bit. does it flash the red light when it turns off? do you still have the progskeet connected?

no flashing.
only it turn on after quickly turn off without any beeps.
break fixed compete.but after that i turn off then turn on.
no ps3 is closed complete hdd install & ... (remove all progskeet wires after flashing)
any idea?
this is a break or hardware fail?

[baileyscream]

Originally Posted by MHMProSoft no flashing. only it turn on after quickly turn off without any beeps. break fixed compete.but after that i turn off then turn on. no ps3 is closed complete hdd install & ... (remove all progskeet wires after flashing) any idea? this is a break or hardware fail?

i am struggling to follow you.

1. you have downgraded.

2. you have entered fsm to install rogero cfw

3. you have used the file to exit fsm

4. you have de-hashed with qa-flag

but now it just turns off within seconds? and gives a fixed red light?

can you make a vid and upload it?

[MHMProSoft]

Originally Posted by baileyscream i am struggling to follow you. 1. you have downgraded. 2. you have entered fsm to install rogero cfw 3. you have used the file to exit fsm 4. you have de-hashed with qa-flag but now it just turns off within seconds? and gives a fixed red light? can you make a vid and upload it?

1-yes downgraded
2-enter fsm & install rogero 3.4
3-exit fsm
4-go to xmb & use qa flag
5-check that qa is set
6-install multiman for test.
7-playing a game for example & all is ok.
8-install original 3.55 in recovery
9-install kmeaw
10-testing multiman & games & all games works fine
11-turn ps3 off with controller.
12-after about 2 hours i turn it on but in turn on then quickly turn off
----
i upload a video today for you.
---- on another ps3 that is not mine i have this problem without downgrading
i guess this is not accured due downgrade

[3absiso]

Originally Posted by MHMProSoft Hi everyone... i get the dump & validate it & all is ok & i have good dump. erase completed. now on flashing give me flashing verification failed. i tested : win 7 32 & 64 latest winskeet+winusb/winskeet 111004+libusb0 winskeet 111004 + libusb0+winxp 32 slow poke & ... some time i got many failed in verification. can anyone help me? progskeet 1.1 with wiring.

It happened to me. with one of the PS3.
i had to re-wire all the wires since one or more wire was not good. and make sure that you have 5 Grounds wires and are wired correctly.

and used winskeet 111004 + libusb0 + 8 Bit max (win 7 x32 or Win xp)

[MHMProSoft]

Originally Posted by 3absiso It happened to me. with one of the PS3. i had to re-wire all the wires since one or more wire was not good. and make sure that you have 5 Grounds wires and are wired correctly. and used winskeet 111004 + libusb0 + 8 Bit max (win 7 x32 or Win xp)

this problem has solved but there is a new problem!!!
read my last post in this topic page 18
when i turn the ps3 on it will turn off quickly without any beep