[ouso1999]

Originally Posted by SeanP2500 i suppose you need to start looking at your network how is everything setup? Do you have a modem connected to a router connected to a switch? Are there hard wires going from your switch to your ps3 and to your pc? Are you trying to use wireless? Do you even have a switch and you are just using a router? Do you have a wired connection to your switch to pc but are you wireless from ps3 to your router? I think using wireless could be possible but also cause issues. My setup is modem router switch from switch hard wires to both pc and ps3. You may have to login to router and open ports there. You may have to open ports on your pc (which appear ok) hope this helps...

I tried forwarding the ports but the error still exists and I use wired connection.

[ouso1999]

Originally Posted by windrider42 I can still only find info that PSN is down for that error code, or there is a problem with your Internet. Or they say to shut down PS3, unplug for a few minutes. Then start up and try again. I am using an ethernet cable on my PS3, not wireless. So maybe wireless is the problem.

hi windrider42
I did all what u told me but still not working and I use wired connection , and the error comes up when I use Ethernet or Wireless.
************* [ - Post Merged - ] *************
hi guys
someone told me the solution is to set environment to np in debug settings...how to do that?
waiting 4 response

[windrider42]

Originally Posted by ouso1999 hi windrider42 I did all what u told me but still not working and I use wired connection , and the error comes up when I use Ethernet or Wireless. ************* [ - Post Merged - ] ************* hi guys someone told me the solution is to set environment to np in debug settings...how to do that? waiting 4 response

If you have installed toggle_qa.pkg, then run it. The PS3 will beep 3 times and return to xmb.

Then go to Network settings on XMB, don't open it, just scroll right down to it and press the key combo (all at the same time):L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down on your PS3 Controller.

Then more options should show up. Go to debug settings. I think it is already set as NP though. I would have to check on mine.

Here are what the settings stand for

http://www.ps3devwiki.com/wiki/QA_Fl...28CEX.2FDEX.29

[Firebuble]

check your firewall... i had eset 5 and even closing it ****psn did not work, so i uninstall it and then it works almost fine

also, i have a problem, it disconnect me every 10~15 min... i dont know why, but while im playing any online game (like ssx) a disconnect message pops up, and that sucks

[SkateTrash420]

i thought you guys didnt have cfw psn access

[ichris]

Originally Posted by SkateTrash420 i thought you guys didnt have cfw psn access

It is sporadic at best and usually very short lived so for the most part there usually is no PSN access.

[SkateTrash420]

its still garbage for ppl who a truely good at the games online

[ichris]

Originally Posted by SkateTrash420 its still garbage for ppl who a truely good at the games online

Well, I suppose that people who use the online access with CFW to cheat is pretty lame.

However, I just use the online part to synch my trophies and access my account, not to play any games online.

[ouso1999]

Originally Posted by windrider42 If you have installed toggle_qa.pkg, then run it. The PS3 will beep 3 times and return to xmb. Then go to Network settings on XMB, don't open it, just scroll right down to it and press the key combo (all at the same time):L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down on your PS3 Controller. Then more options should show up. Go to debug settings. I think it is already set as NP though. I would have to check on mine. Here are what the settings stand for http://www.ps3devwiki.com/wiki/QA_Fl...28CEX.2FDEX.29

could u tell me what's toggle_qa and what's the use of it?BTW I'm on rogero....may the installation of it cause Brick?
BTW I downgraded my ps3 before by e3-flasher.

[windrider42]

Originally Posted by ouso1999 could u tell me what's toggle_qa and what's the use of it?BTW I'm on rogero....may the installation of it cause Brick? BTW I downgraded my ps3 before by e3-flasher.

If you check in the downgrade section of the forum, toggle_qa is done after downgrading, so that you can safely install other CFW..

I have Rogero as well, and installed the qa flag. It doesn't brick your PS3 or anything like that.

The only thing to be careful with it is this>>> If your using recovery to update any firmware, make sure you don't have a disc in the drive, as it will use the firmware on that disc and install to your PS3.

I can't say that it will help you with connecting to PSN, as its not needed.

Do you also dual boot with the e3 flasher. I was going to ask how your connection is on OFW?