[crossover]

Ever since i went on PSN or used 4.25 spoofer map packs stopped working. do you know what's the problem? i disabled spoofer and tried reactivating map packs still doesn't work.

[ZOMBIEKILLAH]

Originally Posted by crossover Ever since i went on PSN or used 4.25 spoofer map packs stopped working. do you know what's the problem? i disabled spoofer and tried reactivating map packs still doesn't work.

When you disabled the spoof the vsh became un-patched probably do to the PSN spoof/ files replaced the patch vsh files. I would think might be the case. Only way to get the working again is to re spoof with original spoof & you have to be very cautious using 2 spoofs even if one is disabled being it was installed could lead to Red Screen of Death. personally i would go back to OFW 355 then start over clean to avoid any problems..

I know it sux to do it all over, this is one reason i don't bother with spoofs that replace the patched reactpsn files. I would have done the cert for PSN ,via FTP & left the spoof alone to avoid deactivation..

[crossover]

i had to spoof to 3.55 to avoid the update to 4.25 to play MW3.

Thanks for the advice. i will try reinstalling official firmware and kmeaw

[KoTupuhiAu]

Originally Posted by ZOMBIEKILLAH you need my edit-> HaXXoR BoTz v4 package to play against 19 BoTz.. I am making new one on 104 or 105 update that will still install over my 113 but you have to install 113 over my MP BoTz after your done playing to go to normal zombies/MP=then repeat as needed. There is already BLUS30591 / BLES01031 posted in the thread here look for it if the game ID i mentioned is on of yours for now. You have to play in LAN & i be connected to a router to play LAN/Solo =BoTz. ************* [ - Post Merged - ] ************* Did you open that .NFO file & click on next link ? If no do it .

opened nfo file with notepad and found the information thank you.
I am on kmeaw and have classic zombies and first strike already installed from ps store. i must not delete game data and move game folder to temp dir first? do i just go thru the process but only install the third fourth and fifth maps? do i put all raps in exdata or just the last three?
thanks again for your help

[gibson25]

Black screen on BLES01031 !

[ZOMBIEKILLAH]

Originally Posted by KoTupuhiAu opened nfo file with notepad and found the information thank you. I am on kmeaw and have classic zombies and first strike already installed from ps store. i must not delete game data and move game folder to temp dir first? do i just go thru the process but only install the third fourth and fifth maps? do i put all raps in exdata or just the last three? thanks again for your help

Use the only necessary Raps & DLC + Patch your CFW first if you do not have it already patched & do not activate on your main user cause you have them DLC activated + a exsisting act.dat ,follow the instructions . Patch CFW \Create a new user aa if using ReactPsn.2.0 = Is using reactPsn.2.20 which i would use 2.00 you choice i never had the DLC fail to activate for me on 2.0 .. Back up your act.dat & rif files in your main user anyways or you will not get them back if you lose them = no activate DLC you already have it that happened.

Originally Posted by gibson25 Black screen on BLES01031 !

Black screen is on your end not my patch i have 3 different copies of Black ops & BLES01031 is one of them & works fine .

[butters84]

Originally Posted by ZOMBIEKILLAH Black screen is on your end not my patch i have 3 different copies of Black ops & BLES01031 is one of them & works fine .

Originally Posted by gibson25 Black screen on BLES01031 !

Same here with BLES01031. copy from original BR.

[fisiologhik]

Sorry for the newbie question but what do i need to BlackOps be playable online with everthing? I just know play online with MW3.

I need to download all pkg and then install BLES01031-BLACK.OPS.DLC.113.v3.0Patch.FIXED-[ZombieKillah]?

PS-I have BLES01031 release.

[deadnburied]

could you provide any help for me? i'm on the official true blue cfw
react psn installs and says 5rif 0edats
black ops starts just fine, and the cfg mod even works perfectly.. however none of the dlc show up...
i have tried uninstalling and reinstalling in every order with no success...
thinking about throwing away my dongle and switching to dex.. think i would have better luck on a dex fw?
haven't tried vhs.self patcher.. since i thought it was only kmeaw users only, any suggestions?

[ZOMBIEKILLAH]

Originally Posted by butters84 Same here with BLES01031. copy from original BR.

You are going to have to figure that out then . If you are using old version of MultiMAn then update .I am using 3 of these patches + the others i have confirmed already from others . I have 6 copies of Black ops 3 regions & on 3 CFW 355 PS3s & i am using 3 of the patches in this thread & BLES01031 is one of them like i said above . I have on internal + external .External using BD mirror + BDEMU.255.pkg installed & mu payload set to Hermes .I am on 02.09.02 multiman so i am not sure what you 2 are having this problem you need to figure it out cause i test before posting ..

The other patches i posted i figured out what the problem was & i told people do not bother with them only the last version i posted here & other sites Black ops 113 Patch Fixed v3.0 1000% fixed.. I am a Black ops freak & have 20+ packages installed just for Black ops & i have may modded special custom pkgs for install over 113 with dummy files & i can go backwards & forwards with my updates without deleting my data & i still get no black screen so my advice .

Make sure you know what your settings are & always set permissions cause i do when installing new patch on my slim. I switch so much sometimes the PS3 seems to remember the last patch & once in a while i get Black screen if i dont set permissions again ,so its a habit now for me .