[ZZ008]

console CEC2512A,miniver check downgrade 3.50 .
install E3 FLASHER and ONE KEY downgrade successfully and go into FSM.
but install cfw failed.put Lv2diag.self and PS3UPDAT.PUP in root USB port ,power on console hdd activiting only a while and nothing any happened.i have being waited 1 hours ago.go out of FSM and try again ,but failed again.
open JaiCraB_LOG.TXT ,it empty ,size 0KB.
can anyone help me ?
thank you for input

[baileyscream]

Originally Posted by ZZ008 console CEC2512A,miniver check downgrade 3.50 . install E3 FLASHER and ONE KEY downgrade successfully and go into FSM. but install cfw failed.put Lv2diag.self and PS3UPDAT.PUP in root USB port ,power on console hdd activiting only a while and nothing any happened.i have being waited 1 hours ago.go out of FSM and try again ,but failed again. open JaiCraB_LOG.TXT ,it empty ,size 0KB. can anyone help me ? thank you for input

you havent put a link to what guide you have followed so its hard to know if the guide is compleate or if it has missed any steps.

follow mine http://www.ps3hax.net/showthread.php?t=39766

[ZZ008]

followed this one:E3 FLASHER INSTALLATION and DOWNGRADE TUTORIAL (Khalkedon) - YouTube
this is my original dump:http://www.mediafire.com/download.php?a7k4jq3zhk2p9s3
flash original dump back to console,console said a problem found ,need update.but update in Recover Menu failed with error :8002F313.try again and failed again.

[Freesty]

How you flash your original dump? and how console work when you power on it?
first you must flash good original bios and make console work with it and then start with downgrading and other things.
this bios what are you have to upload is NOT your original bios-this one is already patched so be careful on steps.

[baileyscream]

Originally Posted by ZZ008 followed this one:E3 FLASHER INSTALLATION and DOWNGRADE TUTORIAL (Khalkedon) - YouTube[/url] this is my original dump:http://www.mediafire.com/download.php?a7k4jq3zhk2p9s3 flash original dump back to console,console said a problem found ,need update.but update in Recover Menu failed with error :8002F313.try again and failed again.

have you varified your dump?
not by using the e3 checker as that doesnt check anything propperly but by opening the dump in hex editor and checking each area yourself

my guide has the full downgrade process so go follow it.

check your dump.

[haz367]

jaicrab.log

normally, it isn't recommended to use the jaicrab 355 downgrade files only, and i never really know about it, some quotes when to use "jaicrab" lv2diag files:

to allow users that get the error during update due to a faulty blu ray drive to update without error.

This does the following: When you use a update package (whether downgrade or upgrade) it skips the Blu-ray update files. So when you upgrade from 3.41 -> 3.55 you get 3D Blu-ray installed. When you Downgrade the 3D still remains!

if nothing is broke to begin with and u are downgrading using that tutorial
one would use the default lv2diag.self's (enter/exit) along with rogero 3.6(no-check)and the LOG file written while it updates is named UPDATER_LOG.TXT

http://www.ps3devwiki.com/files/lv2d...%20downgrader/
http://www.ps3devwiki.com/files/firm...r/Rogero-V3.6/

and some info about that error 8002F313, basically format hdd on pc

The update failed (8002f313) usually if there is a regkey file system was corruptted or if hdd itself has been damaged... the ps3 system itself provide a feature HDD format and Backup/Restore systems, as you see above.

However, when you use the above features, ps3 will use/restore the system stored in dev_flash. (old system installed that may have been corrupt as well.) in this case, it might can not fix the problem.

By formatting the hdd on the PC, it will remove all the PS3 systems on your hdd,.. and your console can not recognize the ps3 firmware on it hdd, so it will create a new system on the hdd by extracting from FW updater. You will be asked for FW update of same version or higher...

[ZZ008]

Originally Posted by haz367 jaicrab.log normally, it isn't recommended to use the jaicrab 355 downgrade files only, and i never really know about it, some quotes when to use "jaicrab" lv2diag files: if nothing is broke to begin with and u are downgrading using that tutorial one would use the default lv2diag.self's (enter/exit) along with rogero 3.6(no-check)and the LOG file written while it updates is named UPDATER_LOG.TXT http://www.ps3devwiki.com/files/lv2d...%20downgrader/ http://www.ps3devwiki.com/files/firm...r/Rogero-V3.6/ and some info about that error 8002F313, basically format hdd on pc By formatting the hdd on the PC, it will remove all the PS3 systems on your hdd,.. and your console can not recognize the ps3 firmware on it hdd, so it will create a new system on the hdd by extracting from FW updater. You will be asked for FW update of same version or higher...[/code]

thanks ,hdd formated on PC and use the lv2diag you sent failed again.nothing changed.
removed hdd and downgrade,JaiCraB_LOG.TXT said:
Lv2Diag version JaiCraB.NoBDv1
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
get_device_info() device_id = 0x101000000000007, failure = -2147418110
setup_storage_regions() failure
manufacturing updating FAILURE(0x8002f0e0)
Total Elapsed time = 30586 msec

[ZZ008]

If anyone can rescue my console,i will donation in return.

[haz367]

once again, i'm not sure why u are using jaicrabs lv2diag, care to explain why instead of default lv2diag enter/exit alongside (no-check)rogero PUP, both on root of USB stick plugged into right slot

another thing i can think of, are the e3 switches set for updating/installing firmware?!
switch 1-5 DOWN / switch 6UP

if it fails no clue man i'm sorry....goodluck on fix anyway

[ZZ008]

Removed hdd and use normal lv2diag will say:
UPDATER_LOG.TXT
manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
get_device_info() device_id = 0x101000000000007, failure = -2147418110
setup_storage_regions() failure
manufacturing updating FAILURE(0x8002f0e0)
Total Elapsed time = 31587 msec

so,here is no problem with lv2diag.