[arkano]

My PS3 bricked when I was trying to downgrade.
Now there's no video signal or HDD activity and stay on for 3 seconds.
Then I soldered the NOR Tristate/SBE and A POINT/SCBE.
Now he is getting on, but no video signal or HDD activity.
I reflash my dump, after've used the e3_downgrade.bin, without video signal or HDD activity still.
When I tried using the dongle fsm (I use the E3 Card Reader) it does not start, the USB ports are dead. And no video signal or HDD activity.

OBS: After the many reflash, I cut the NOR Tristate/SBE wire and the ps3 still on but no video signal or ad activity.

Can someone help me?
My Dumps is here

[killkon]

i am having the same problem with mine it seems as if it is stuck in tristate mode i cant seem to get my other system out of it either does the power button repond when you hit it or do you have to hold it for 30 secs to turn it off
************* [ - Post Merged - ] *************

Originally Posted by arkano My PS3 bricked when I was trying to downgrade. Now there's no video signal or HDD activity and stay on for 3 seconds. Then I soldered the NOR Tristate/SBE and A POINT/SCBE. Now he is getting on, but no video signal or HDD activity. I reflash my dump, after've used the e3_downgrade.bin, without video signal or HDD activity still. When I tried using the dongle fsm (I use the E3 Card Reader) it does not start, the USB ports are dead. And no video signal or HDD activity. OBS: After the many reflash, I cut the NOR Tristate/SBE wire and the ps3 still on but no video signal or ad activity. Can someone help me? My Dumps is here

have you tried patching your backup?

[arcadekidflo]

Arkano , upload it somewhere else

[arkano]

Killkon, i have to hold the power button for 30 seconds to shutdown, i'am stuck in tirstate mode.And yes, i try already patch my beackup, but dont work.

arcadekidflo, i upload my orinal dumps in other server here

[DANNY G]

i had this spent more that 100 hours trying to fix in the end ps3 got smashed to tiny pieces and im still happy about it now.

[killkon]

Originally Posted by arkano Killkon, i have to hold the power button for 30 seconds to shutdown, i'am stuck in tirstate mode.And yes, i try already patch my beackup, but dont work. arcadekidflo, i upload my orinal dumps in other server here

your dump file is good have you cut the wire running to the tristate? i have on mine but i still have the same problem hope that someone helps us both..

[Bigbones87]

I'm not sure you guys are doing it right. I have unbricked a bunch of consoles and never seem to have a problem. You may be doing it right and it is just messed up, but let's check. Take your original unpatched bios from when you where on the updated firmware and put them on your sd card and put them in the flasher. Make sure they are named bkpps3.bin . Then put switch 1 up and turn the console on. Then after a few seconds hit start on the flasher. Let the lights all light up. After they are back to flashing alternatively, then leave the console on. Take the sd card out and put it in the computer and put the e3downgrade.bin on the sd card with your bios. Leave bios on there. Then put it back into the flasher and put switch 6 up and 1 down. Then hit reset on the flasher. It is the red button underneath the sata input. Once the blue lights come back on hit start. Wait until the blue lights light up one by one until the alternate again. Then turn off the console by holding the power button down. Then turn it back on, and wait for a few seconds. The turn it off by pulling power or switching the switch. Then put in the fsm dongle and do the power eject. After it shuts off, put the USB with the lvl2 diag from step 1 folder and rogero.pup into right USB port and turn the console on. After it shuts off put the lvl2 step 2 on USB and put in right USB port and turn the console on. After it shuts off, turn the console back on with nothing in the USB ports and it should be fixed.

[mimmo]

I'm in the same situation, and i have not even the possibility to write my nor, becasuse the e3 flasher with a linker installed tell me "failed to write ps3 bios"
Any ideas?

[killkon]

Originally Posted by mimmo I'm in the same situation, and i have not even the possibility to write my nor, becasuse the e3 flasher with a linker installed tell me "failed to write ps3 bios" Any ideas?

sounds like for you you nedd to put a coin on the clip because it is not all the way on the clip is a nightmare the only way i could get mine to work was taping a nickle to the top
************* [ - Post Merged - ] *************
ok i never kept the backup file on the sd card at the same time as the downgrade file i will retry thanks ill keep you posted

[mimmo]

Originally Posted by killkon sounds like for you you nedd to put a coin on the clip because it is not all the way on the clip is a nightmare the only way i could get mine to work was taping a nickle to the top ************* [ - Post Merged - ] ************* ok i never kept the backup file on the sd card at the same time as the downgrade file i will retry thanks ill keep you posted

I have the e3 linker...it worked good even with fast dualboot up days ago when tarting the ps3 with all switches down and the hd ofw installed, the e3 showed me all led power off...the linker is not setted in the right place (maybe an accidental hit on the console), so i decided to redo the guide from the beginning to have a normal dualboot...but when i put the cfw hd with all switches down and the ps3 told me to install a fw 4.25 or newer, i did it, and the ofw blocked its installation retrying to do it endless. So i decided to restore the situation with a flash fun with my dump, but the e3 give me immediately error "error to write ps3 bios". Always the same, with all the dumps i tried to write.