[Decoy]

Originally Posted by DEFAULTDNB QA toggle is a PKG, install it from the install packages option on 3.55 CFW.

I see . Thanks ,

[alirza]

Hello
I ask you to help me please
First I have to do all what is the explanation for (downgreed nand by progskeet and clip>>etc) and you've got a problem is that the program (WinSkeet40000) does not read the memory Nand what's the problem
Secondly, I have a (ps3 CECHG01) Where can I find Nand memory that is reduced and work on them specifically.
Thank you all

[MJ999]

Originally Posted by alirza Hello I ask you to help me please First I have to do all what is the explanation for (downgreed nand by progskeet and clip>>etc) and you've got a problem is that the program (WinSkeet40000) does not read the memory Nand what's the problem Secondly, I have a (ps3 CECHG01) Where can I find Nand memory that is reduced and work on them specifically. Thank you all

Is progskeet detected on the computer, you installed the correct driver ? which winskeet version are you using ??

Secondly >>

[baileyscream]

Originally Posted by alirza Hello I ask you to help me please First I have to do all what is the explanation for (downgreed nand by progskeet and clip>>etc) and you've got a problem is that the program (WinSkeet40000) does not read the memory Nand what's the problem Secondly, I have a (ps3 CECHG01) Where can I find Nand memory that is reduced and work on them specifically. Thank you all

first
dont use red as that is reserved for highlighting problems with the guide only

second
can you please explain your problem better as i have no idea what you are talking about.

[alirza]

Hello MJ999
I thank you very help me .. I used to issue Winskeet111205
************* [ - Post Merged - ] *************
Hello baileyscream


Thank you and your efforts wonderful help speed
Dear
The problem I have when I get to pull dump by paragraph (Winskeet111205), the program does not read the Nand memory in my bottom.
I hope that's clear now.
************* [ - Post Merged - ] *************
Will do I work on Nand memory on hand GP U or behind GP U?

[baileyscream]

Originally Posted by alirza Hello MJ999 I thank you very help me .. I used to issue Winskeet111205 ************* [ - Post Merged - ] ************* Hello baileyscream Thank you and your efforts wonderful help speed Dear The problem I have when I get to pull dump by paragraph (Winskeet111205), the program does not read the Nand memory in my bottom. I hope that's clear now. ************* [ - Post Merged - ] ************* Will do I work on Nand memory on hand GP U or behind GP U?

if it doesnt tell you your nand type when you press "auto" then check and re check the clip is on flush

also put a wire from +3.3v on the progskeet to 3.3 on the "Y" conector

[alirza]

I have done all these things and there was no change as well?
(R9 with 3.3v & R 11 with 3.3v setting) soldering in prog skeet

[baileyscream]

Originally Posted by alirza I have done all these things and there was no change as well? (R9 with 3.3v & R 11 with 3.3v setting) soldering in prog skeet

honestly what you have there is the clip not sitting flush or a pin in the clip is bent / stuck / damaged.
have a good close look
or take a pic with a good cam so you can zoom in and see if everything looks ok

[Decoy]

Some one @ hardstore.com told me progskeet 1.2 will be shipped empty and will need a jtag programmer ...

[alirza]

This is a picture
I did everything did not work with me so far
http://s7.postimage.org/9lo74qk63/image.jpg