[Goldeneye]

Originally Posted by djbaaz sorry for being so noobish, but what is YLOD and GLOD?

YLOD: Yellow Light Of Death
GLOD: Green light of death..


YLOD : you got a dust machine ( right? :P )
GLOD : oh well, dno

[JustThatDude]

Originally Posted by Goldeneye YLOD: Yellow Light Of Death GLOD: Green light of death.. YLOD : you got a dust machine ( right? :P ) GLOD : oh well, dno

YLOD is cracked solder balls under the GPU.
GLOD is either a died out RSX Chip(you'll need one reballed on) or its the same thing as YLOD with cracked solder balls.
It is always recommended to reflow first and see if it is fixable and then getting a reball after reflowing.

[playerkp420]

Originally Posted by JustThatDude YLOD is cracked solder balls under the GPU. GLOD is either a died out RSX Chip(you'll need one reballed on) or its the same thing as YLOD with cracked solder balls. It is always recommended to reflow first and see if it is fixable and then getting a reball after reflowing.

YLOD can be many different things.

YLOD

YLOD - Yellow Led of Death (Flashes Green, Yellow then Red)

    Failure in the hardware_init stage. Suspects: RSX, CELL BE, XDR Ram, GDDR Vram, Syscon, South Bridge , Starship2 (if NAND SKU), NAND/NOR Flash, Power Supply, Fuses, Regulators, Cooling/Fan 

If you ground out tristate on a console with YLOD, it would GLOD instead if it is caused by bad flash. This makes it an easy way to check if the YLOD is flash caused (most common) or RSX caused (second most common).

SOURCE

[JustThatDude]

@playerkp420 thanks for that. More than likely it's almost always cracked solder balls. The bad flash is the first I've heard.

[DEFAULTDNB]

This is a great value service, props to @JustThatDude

[playerkp420]

Originally Posted by JustThatDude @playerkp420 thanks for that. More than likely it's almost always cracked solder balls. The bad flash is the first I've heard.

Yeah, the Ylod from the flash is like when you brick with e3 flasher. It acts like Ylod. Then when you solder the tristate wire it stays on like glod, so you can use flash fun mode to fix it.

[rashid-96]

brother will you downgrade my cechk01 phat module,i will shipped to you

location:united arab emirates

send me message in (rashid19961 @gmail.com ) if you accept

[JustThatDude]

Originally Posted by rashid-96 brother will you downgrade my cechk01 phat module,i will shipped to you location:united arab emirates send me message in (rashid19961 @gmail.com ) if you accept

USA ONLY and the CECHK01 is a NAND I only do NOR

[rashid-96]

Originally Posted by JustThatDude USA ONLY and the CECHK01 is a NAND I only do NOR

brother but when i check the menu mine is nor

if it is nand is there any service for nand module

[playerkp420]

Originally Posted by JustThatDude USA ONLY and the CECHK01 is a NAND I only do NOR

CECHK01 is a nor model.