[r07f1]

lol @zecoxao

it seems trollers are getting smarter xD

[diesel701]

Originally Posted by zecoxao this doesn't convert sorry folks. i already tested it, it's useless.

I think this program want to be the missing step in the process CEX to DEX leaked time ago, that with the ObjectSuite. THIS
With a valid request_idps.txt modded for the DEX conversion I think you can use ObjectSuite to make the CEX to DEX conversion.

If so, we can take a 4.25 dump, use this program to retrieve request_idps.txt, mod it with DEX hex and then use ObjectSuite for inject it.

What do you think?

[Abcdf]

Originally Posted by diesel701 I think this program want to be the missing step in the process CEX to DEX leaked time ago, that with the ObjectSuite. THIS With a valid request_idps.txt modded for the DEX conversion I think you can use ObjectSuite to make the CEX to DEX conversion. If so, we can take a 4.25 dump, use this program to retrieve request_idps.txt, mod it with DEX hex and then use ObjectSuite for inject it. What do you think?

Apparently, this is a "missing" step in this tutorial

http://www.*******.com/ps3-hacks-jai...requires-idps/

Click here to see full text

DEX to CEX Converter By "You know who"

**WARNING** IF THIS TUTOTIAL ISN'T FOLLOWED TO THE LETTER YOU MAY BRICK, THE AUTHOR (THAT WOULD BE ME) DENIES ALL KINDS OF RESPONSABILITY SHOULD YOUR PS3 GET DAMAGED IN ANY WAYS. YOU KNOW THE RISKS **WARNING**

Requirements:

1. A playstation 3 on firmware 3.55 or below
2. A dongle to go to Service mode
3. A usb pendrive
4. A brain
5. The author of this little trick.
6. Have your pc connected directly to the ps3 on ethernet with the ip set to 192.168.0.100 and the hostmask to 255.255.255.0 (make sure no firewall is running, not even windows one, this may prevent your console from connecting to the pc)

Procedure:

** PART 1 **

1. Set your console into service mode with any compatible dongle.

2. Put the content of the converter-console folder at the root of your usb pendrive.

3. Extract ObjectiveSuites-GetData on your PC.

4. Put the usb pendrive on the last usb port on the right of your console.

5. Run ObjectiveSuites.exe from ObjectiveSuites-GetData

6. You now have a few seconds to start your console, start it.

7. Objective Suite should display "PASS" and txt files will be created in the Temp dir. Once done, power off your console.

8. Get ALL these txt files from your temp directory and send them to the author (me) with informations about your playstation 3 model (FAT/SLIM, CECH* model)

** PART 2 **

9. You should recieve from the author (Yeah me again) a file called request_idps.txt

10. Extract ObjectiveSuites-SetIdps on your pc.

11. Put the request_idps.txt in your temp folder (MAKE EXTRA SURE IT'S THERE OR YOU WILL BRICK)

12. Run ObjectiveSuites.exe from the ObjectiveSuites-SetIdps directory.

13. Start the SAME CONSOLE YOU GOT THE TXT FILES FROM (If it's another console you WILL BRICK IT).

14. Wait until Objective suite displays "PASS" Then power off your console, at this point your console should be a Debug one.

** PART 3 **

15. You will now need to do a drive initialisation in order to use the bluray drive on your console. Put your usb pendrive on your pc, delete all the files you previously put in there, Put "Lv2Diag.self" from the "set up" directory at the root of your pendrive along with PS3UPDAT.PUP (that's 3.30 debug firmware)

16. Put the pendrive on the usb port on the most right of your console.

17. Power on the console, The screen will be black and the green led will stay lit, wait until it blinks and the console powers off, once it does the firmware will be installed.

18. Put the pendrive back on pc, delete the files you put in there previously, and copy the content of the "drivefix" folder to the root of the pendrive.

19. Put the pendrive at the usb port most on the right of your console and power it on.

20. The drive initialisation will then occur, wait a couple of seconds, then power off the console (you may have to unplug it from the AC)

21. Put the pendrive back onto the pc, delete the files you previously put in there, then copy the Lv2diag.self from the "finalize" folder.

22. Put the pendrive on the usb port on the most right of your console. Power it on. Your console will power on for a few seconds then power off.

apparently the program works, I tested with a nor dump and takes the idps

[dwood18]

so if we can decrypt a flash assuming they are encrypted we might be able to convert 4.25 ps3s to dex and downgrade?

[diesel701]

Originally Posted by dwood18 so if we can decrypt a flash assuming they are encrypted we might be able to convert 4.25 ps3s to dex and downgrade?

I think that the dump is not encrypted, I've used a 3.70 dump file and the have created the request_idps.txt file.
The step now hidden (FOR ME) is the modding of the file request_idps for the cex to dex conversion.
If we know that, I think we can do what you said.

I don't have a flasher so I can't try this method...

[butnut]

Objective suites is not a converter. Its just a flasher. Like e3 or progskeet. You still need an external method to do the dex conversion.

What we really need is more info on eid5, But I bet that will never be leaked in this console life time.

[Abkarino]

Originally Posted by zecoxao this doesn't convert sorry folks. i already tested it, it's useless.

Sorry you are wrong i had tested it and i confirm that i had converted my console to DEX using ObjectiveSuite-SetIDPS + this tool.
You need to do it right way so you could convert your console.

[DEFAULTDNB]

Originally Posted by Abkarino Sorry you are wrong i had tested it and i confirm that i had converted my console to DEX using ObjectiveSuite-SetIDPS + this tool. You need to do it right way so you could convert your console.

Can you please post the exact method you used: step-by-step?

[haxxxen]

i guess you have to use this tool to get the (decrypted?) eid txt files only, the ones which were created by sony servers.
then you have to make changings to target id yourself and use setidps objective suit and fsm to flash the new txt file

edit
this can easily convert cex2dex and dex2cex only using objective suit, which flashes idps only to ps3 automatically and safe to my understanding.
question is if it does work only for eeid0 or even eeid5?

[diesel701]

ObjectSuite is needed only to inject the modded idps file, with Target ID changed to DEX (http://ps3devwiki.com/wiki/Target_ID).
What I don't know for now is the right position of the TargetID in the idps.

If anyone with a flasher can test and report the result here, would be awesome.

Abkarino can you explain how you have done?