|
|
10-25-2012
|
#1 |
|
Member
 
Join Date: Jul 2012
Posts: 136
Likes: 2
Liked 17 Times in 13 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
Progskeet v1.2 problems
Hello so I am trying to program my progskeet v1.2 and I am following Baileyscream's guide but my computer keeps telling me "USB device not recognized" and when I try testing for shorts it gives me the error code "device not found! Please check all leads on U2 and leads 50 though 75 on UI"
so all I have done is download the Nand file from Baileyscreams thread, so now winskeet4000 is on my computer. I conncted the usb cable to the smaller black chip that came with the progskeet, then I connected the 80c 60v vw-1 ribbon cable (the long skinny one) to the progskeet. and connected it to my laptop. What am I doing wrong? ************* [ - Post Merged - ] ************* okay so here is a photo of everything i was connecting to my computer and how i had it all connected, the other is a photo of my v1.2 pprogskeet. I noticed that (c3,c4,c7,c8,c13 and c14) seem to be soldered very poorly compared to the photo that the wholesaler had on their website. would this have any affect on the chips performance? Last edited by Kazrael21; 10-25-2012 at 07:25 PM. |
|
|
|
10-25-2012
|
#2 |
|
Member
 
Join Date: Oct 2011
Location: 0x8C-0x00
Posts: 804
Likes: 240
Liked 361 Times in 239 Posts
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
|
Those resistors are touching each other, and causing shorts, Just replace it
__________________
 |
|
|
|
10-26-2012
|
#3 |
|
Member
 
Join Date: Aug 2010
Location: Sea
Posts: 167
Likes: 14
Liked 19 Times in 15 Posts
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
|
Actually , they sent me message saying that if you received a faulty product we will replace it for free.. This is the picture they sent too .
Last edited by Decoy; 11-07-2012 at 02:56 AM. |
|
|
|
|
10-26-2012
|
#4 |
|
Member
Join Date: Jul 2012
Posts: 136
Likes: 2
Liked 17 Times in 13 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
well it seems like my progskeet is fine, as long as the inside edges are not touching then its okay, the outside edge is the ground plane so if they are touching it wont cause any shorts.
But im still getting the error usb not recognized.. someone please help. I need to know the proper way to program this with the injectus |
|
|
|
|
10-26-2012
|
#5 | |
|
Senior Member
 
Join Date: Feb 2011
Posts: 1,586
Likes: 557
Liked 1,046 Times in 526 Posts
Mentioned: 531 Post(s)
Tagged: 0 Thread(s)
|
c11 looks like it is shattered i can also see resistors missing ie r8? if it works the same as v1.1 then that should be connected to be detected by pc ie r8 powers prog via usb BUT DO NOT CONNECT IT YET let me look at the prog site to see if i can get some info about this board ************* [ - Post Merged - ] ************* @Kazrael21 have you updated the bitstream for the progskeet? it doesnt have anything on it when you buy them you do have the injectus for programing? and i see a switch on the side of the slave board does that do anything when connected to the pc? Last edited by baileyscream; 10-26-2012 at 12:48 PM. |
|
|
|
|
|
10-26-2012
|
#6 |
|
Member
Join Date: Jul 2012
Posts: 136
Likes: 2
Liked 17 Times in 13 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
i have connected it with injectus and i have tried the swtch, neither do anything when connected to the pc, just the same error codes.
************* [ - Post Merged - ] ************* I took a close look at c11 with a magnifying app i just downloaded haha... but c11 doesnt look shattered its covered in some glossy glue(not sure what it is) or something and what looked like ink, c10 has it too it just didnt show up in the pic. ************* [ - Post Merged - ] ************* @baileyscream I dont want to sound like a total newb, how do I update the bitstream? I downloaded your .dat, .pdb, and .stp files but I have absolutely no idea what to do with them. ************* [ - Post Merged - ] ************* So the progskeet team sent me an email saying to connect the progskeet to injectus and conect it to my pc while infectus software is open and i should see progskeet being recognized by the infectus software. The infectus software is still reading "idle". A pic of my connection is attatched. |
|
|
|
|
10-26-2012
|
#7 | |
|
Senior Member
Join Date: Feb 2011
Posts: 1,586
Likes: 557
Liked 1,046 Times in 526 Posts
Mentioned: 531 Post(s)
Tagged: 0 Thread(s)
|
and your pc should detect new hardware. does it do this? if not do you get the usb icon next to your pc's clock to say a device is connected? if not try a different usb port if you do then follow my nand guide for setting up injectus btw the switches on my injectus are both off and my injectus doesnt have that yellow wire attached that the wiki images show (if you have seen them) and i used win xp & win 7 32bit NOT 64BIT |
|
|
|
|
|
10-26-2012
|
#8 | |
|
Member
Join Date: Jul 2012
Posts: 136
Likes: 2
Liked 17 Times in 13 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
There is no driver selected for the device information set or element." Can I still set up the injectus if my comuter does this? ************* [ - Post Merged - ] ************* Okay I figured out what was wrong, i needed to install driver software which was hidden in my C://drive. device is now working properly, I will program my progskeet when I get home from work..Time to give old men their viagra and crazy people their oxycodone.  haha
|
|
|
|
|
|
10-26-2012
|
#10 |
|
Member
 Join Date: Feb 2011
Posts: 48
Likes: 10
Liked 1 Time in 1 Post
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Kazrael, mind to share where u get the skeet 1.2? thanks
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
|
|
