[franzke]

cmon i need to downgrade when im on rogero 4.21 v1.00?? lol i only have this like 2 days ago is it much better than v1??

[kayy]

Originally Posted by argedunknwon dehash it for sure me too i neverdowngrade my ps3 but im gonna dehash it first before i install this firmware

for all owners of PS3 consoles downgraded from 3.55+ using hardware flashers and Rogero_CFW_v3.x

To "Dehash the PS3" (Reset the syscon) and have the PS3 back to normal safer mode like any original ( non Downgraded ) PS3, here are the steps :

1- After completing the downgrade process and having Rogero CFW 3.x up and running, make sure you have the Blu-Ray drive attached or the QA Toggle package won't work.
2- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
3- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
4- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear one Beep and the PS3 will Restart back to XMB.
5- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

6- Now that you have QA flag set, Turn Off your PS3 and Turn it back on but into "Recovery Menu"


err whts dpad_??

[Brent79]

Never mind that....

[habebo]

thanks you so much ROgero , ur the MAn "still hvnt try it out yet " but i hv good feeling bout this , i really appreciate all ur efforts guys , thanks

[argedunknwon]

Originally Posted by bubba Did you go on Network settings then hit the buttons then

yes sir my ps3 never downgrade

[kayy]

Originally Posted by Rogero Please dehash your console in case you have downgraded it before, and always keep a Nor/Nand backup aside, these instructions are not meant only for you mate but for all users willing to try out this CFW. Please read all the details and guides on the official release thread before updating. Rogero CEX-4.21 v1.09 Official Release Thread

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

errr, whts d dpad mate??

[Fius]

I have 4.25 OFW, can i downgrade with 4.25 CFW dowgrading to 3.55? or Rogeros is working with CFW 4.25 directly?

[CopyLifted]

Originally Posted by kayy L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down errr, whts d dpad mate??

Directional pad down button

[bubba]

Originally Posted by kayy L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down errr, whts d dpad mate??

Hit DOWN on the dpad
************* [ - Post Merged - ] *************

Originally Posted by Fius I have 4.25 OFW, can i downgrade with 4.25 CFW dowgrading to 3.55? or Rogeros is working with CFW 4.25 directly?

Sorry you can't downgrade , You would need a Hardware flasher

[Simonbuck]

My rogero 4.21 cfw experience.

Ok took the plunge 2 days ago, Kmeaw directly to 4.21 v1, no problem worked straight of the box.

Got enquisitive tonight with the release of v1.09.... took the plunge again

err-ing on the side of caution 4.21 v1> 4.25-355 downgrade fw> Rogero 3.7 through recovery

4.25-355 went with no problem (it wiped my hdd), however when I then tried Rogero 3.7 through recovery my PS3 was asking for 4.40 firmware ??????

after some research I found this:

-Install and run toggle_qa.pkg (it will beep 3 times if it worked correctly)
-Go to network settings and press the button combo L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down
-You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.
-Go into recovery mode and choose option 6 to install Rogero's v3.7 firmware
-It will still say that you need a firmware of 4.40 or higher, but this time it will install Rogero's firmware.
-Follow the rest of Rogero's steps that are located in the first post, and you can get back to 3.55 and install other firmwares like kmeaw etc

This did the trick...... or so I thought !!!

I ended up on OFW 3.50

scratching my head for 10 mins I realised I had left COD Black Opps disc in the BR drive which had used the update from disc.

removed disc, into recovery OFW 3.50 > Rogero 3.7 > Rogero 4.21 v1.09

I am one happy bunny again

Thanks Rogero