[hestar411434]

I was on CFW 4.21 version 1 then i did all of the instructions, but when i try to install the 4.21 V 1.09 from the recovery screen i got this error message 8002F967. Any help?
And it says update data of version 3.40 or later can be installed on this system when i tried updating from the XMB,

[snkysnake02]

I don't get why people are having a problem loading there backups with the eboot fixes in them on this cfw. I have gone threw my backup list and they all work. All my fixes have either come from DUPLEX, NODRM, ZOMBIEKILLAH, or I have patched the eboot myself.

My psn titles from duplex work too.... only things that didn't work were the homebrew pkg's, but I knew they wouldn't going into it.

[LoboGuara]

Originally Posted by BobbyBangin Do you see the instructions quoted to me? They don't mention QA flag. They're the same as the instructions I followed the first time. QA flag is mentioned loosely but not in the guidelines of order of the instructions listed that I followed. Since I followed instructions first and ideas last, the only thing left to be asked is how the eff do I install QA flag from here?

- Downgrading back to 3.55 is always possible using the following steps :
- Download the 4.25 downgrader PUP ---> 4.25 Downgrader Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.
I think you are stucked here- After the downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any OFW/CFW 3.55 or a newer CFW 4.21

[condorstrike]

Originally Posted by hestar411434 I was on CFW 4.21 version 1 then i did all of the instructions, but when i try to install the 4.21 V 1.09 from the recovery screen i got this error message 8002F967. Any help? And it says update data of version 3.40 or later can be installed on this system when i tried updating from the XMB,

I'm guessing here, but seems you had a disc in your drive, and thus updated to OFW, it was a big warning in the instructions.

also this:
4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

[bramee]

can someone say how long till a dex cfw come's around

[hestar411434]

Originally Posted by condorstrike I'm guessing here, but seems you had a disc in your drive, and thus updated to OFW, it was a big warning in the instructions. also this: 4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

There wasn't a disc in the drive and i did it from the Recovery Menu!

[BobbyBangin]

Originally Posted by LoboGuara - Downgrading back to 3.55 is always possible using the following steps : - Download the 4.25 downgrader PUP ---> 4.25 Downgrader Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db - Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" - While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW. I think you are stucked here- After the downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings. - Enable QA flag by following these steps: 1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg 2- Put the "toggle_qa.pkg" on USB and Install it on the PS3. 3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB. 4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time): L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly. - Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP - Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important) - Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any OFW/CFW 3.55 or a newer CFW 4.21

Originally Posted by condorstrike obviously you don't, as the link and steps and download link are in the instructions. If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time): L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down https://dl.dropbox.com/u/64707444/To.../toggle_qa.pkg

Yep and yup. The problem I was having is that it took several reboots for the QA flag .pkg or any .pkg to show up under the install in XMB without any error after I clicked on it. Not sure why other than it's typical that I generally get the exception. Working fine now. Thank you.

[cjugem]

the link isn't working for me. Is it dead?

[condorstrike]

Originally Posted by hestar411434 There wasn't a disc in the drive and i did it from the Recovery Menu!

well, then I'm at a loss, cause sadly I think you are now on 4.21 OFW, if you need some help, find me on irc.

[BobbyBangin]

Originally Posted by hestar411434 I was on CFW 4.21 version 1 then i did all of the instructions, but when i try to install the 4.21 V 1.09 from the recovery screen i got this error message 8002F967. Any help? And it says update data of version 3.40 or later can be installed on this system when i tried updating from the XMB,

Same problem as mine. Just follow the instructions given to me...maybe a couple times and you should be fine. QA flag is vital.