[Adam007]

guys i have a question ^^


i have here a ps3 CECH-2004b that was downgraded from 4,25 to 3.55 and the person that downgraded installed a 3,55rogero v6 cfw on my ps3.

if i want to install some other specific 3,55 cfw like kmeaw, can i just download it and install it via recovery mode or do i have to go first to the 3.55 ofw and then install the 3.55 cfw i want from the recovery menu.

please reply,

[alienkid]

@baileyscream wrote a TUT on downgrading and has a section talking about dehashing.

See here:
http://www.ps3hax.net/showpost.php?p=387777&postcount=4

If you don't know for sure if the individual that downgraded it did it for you, follow the "Recommended way" for De-Hashing from the above link.

[Adam007]

dude there is just too mutch information there, give me just the right info that would do better

[alienkid]

Dude...are you kidding me?
How hard is it to click on bullet-point "11 De-Hashing> QA Flag Method" and following the instructions?

[baileyscream]

Originally Posted by Adam007 dude there is just too mutch information there, give me just the right info that would do better

ITS NOT THAT HARD TO SCROLL DOWN TO THE GUIDES AND SEE THE FOLLOWING

QA flag method

Install and run QA-toggle and make sure it beeps
if you just get a blank screen and nothing happens then you have a faulty bdvd and you cannot do this step. try re-marry bdvd found in the main post then try this step again.

to check you are QA flagged Set your cursor on Network Settings and press the key combo (all at the same time):L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down
if you are QA flagged a new option will show up right below network settings

Power off console
Put unpatched official firmware (e.g. 3.55) on USB Mass Storage device as /PS3/UPDATE/PS3UPDAT.PUP and insert in PS3

Boot into Recovery Menu:
press and hold power button you get 1 beep then a wait then a second beep then the ps3 turns off
press and hold power button again you get 1 beep then 2 beeps let go of power button
select "6. System Update" to reinstall firmware.
If installation finishes without error (there will be no logs you can check!) and boots XMB OK, then dehashing was successful.
Congrats, you now finished downgrading and dehashing. Console runs 3.55 and any firmware of choice can be installed, no longer needing to be patched for downgrader.

anyway try the button combo to see if its still QA flagged first