[spok]

Originally Posted by strangerlover Toggle QA working with 3.55 kmeaw ? i m try to (L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down ) but nothing happen ?

yo, this is what i also want 2 know cause just came back from DEX since max ver is 4.25 and installed KMEAW but ToggleQA combo aint workin so dunno if i have 2 install REBUG or somethin since dont wanna brick and loose my data...

i have NOR which was brickable with CFW 4.25 so plz reply if any1 managed 2 update straight 2 CFW 4.30 from KMEAW via XMB without QA or Recovery thx

EDIT: so i updated 2 Rogero 4.30 via Recovery but latest PSIDPatch/F*PSN aint hiding my ID

[CaptainCPS-X]

Originally Posted by spok yo, this is what i also want 2 know cause just came back from DEX since max ver is 4.25 and installed KMEAW but ToggleQA combo aint workin so dunno if i have 2 install REBUG or somethin since dont wanna brick and loose my data... i have NOR which was brickable with CFW 4.25 so plz reply if any1 managed 2 update straight 2 CFW 4.30 from KMEAW via XMB without QA or Recovery thx

It shouldn't be a problem for both of you if you boot your PS3 into Recovery Mode, then install Rogero CFW 3.55 (v3.7) first.

Then after you're on Rogero 3.55 (v3.7) you can install Toggle QA (Install Package option), and then Run it from the XMB Game Column (not to be confused with the Install Package you just did). The PS3 will black-screen for a few moments and it will make 2 / 3 beeps, then it will send you back to XMB.

Note: Remember not to have any USB device connected to the PS3 while doing this.

After that try the QA key combo while hovering "Network Settings" item in the XMB Settings menu.

Then you can re-boot again in Recovery Mode, and install Rogero CFW 4.30 (v1.0 / patched) AFTER reading the tips I posted very carefully, check all the MD5 hashes before installing anything.

SeeYa!


************* [ - Post Merged - ] *************

Originally Posted by cybinator I thought we were NOT allowed to install CFW 4.3 without dehashing????

The process of de-hashing consist basically in 2 steps (both are covered in my tips / guide) :

1- Installing Toggle QA and then Running it from its new XBM icon (QA key combo should work over "Network Settings" XMB item when properly QA Flagged, if it doesn't work then QA Flags are not properly set).

2- Installing Rogero CFW 3.55 (v3.7) via Recovery Mode, here you have a quote of why:

Once finished the PS3 will restart into XMB with the Syscon hashes reset back to 3.55 in both "ros0" and "ros1" and your PS3 is back like any original/non Downgraded PS3 that can use any CEX/DEX Fw without having to worry about disabling LV1 checks.

More info at this de-hashing tutorial at Tortuga Cove:

http://www.tortuga-cove.com/forums/v...p?f=127&t=3638

SeeYa!

[fafor]

OMG so eazy!

Cashconverters (UK) > 3.41 Slim purchase > Quick format > Already had the files since 2010...

Kmeaw 3.55 > QA Toggle > Restore mode > Rogero CFW 4.30 > Heaven!

[xtrem3x]

All my backups work.
I run them from internal & have never used BD Mirror option.

[Willie C.]

@CaptainCPS-X
Thanks for the response. They made me look at a noob thread but with all thats happenning I understand. I got Toggle QA to to work on both my ps3's a while back. So when I jump that is what Ill do. As far as a bookmark-- I made a word doc. Copy and Paste! Your tut & reply. Thank you very much. I am not a noob by no means but I am ignorant of a few things.

[windrider42]

Nice tutorial CaptainCPS-X
I copied it over to Tortuga-cove with source included

Just want to say about this part
Tips #5 – Finally, while on CFW 4.30, Install multiMAN v04.08.01 and PS3~dev_blind.zip provided by Rogero at Tortuga Cove.

1- Install multiMAN from XMB
2- Activate “write access” to “dev_flash” on multiMAN settings
3- Go to mmOS / file manager and locate the PS3~dev_blind.zip and double click it (pressing X twice)
4- Follow on-screen instructions and restart your PS3.

Its actually

3- Install multiMAN ver 04.08.01 from XMB.
4- Start multiMAN and Press [Select+Start] to open File Manager screen (MMOS)
5- Using the Right analog Stick Double click the first Icon "PS3 Root" to open it.
6- Select "dev_usb000" from the window that opened, and Double click it.
7- Select the file "PS3~dev_blind.zip" and Double click it.
8- A confirmation Message will appear, select "Yes" to install it.

No need for Activate “write access” to “dev_flash” on multiMAN settings

And if you downloaded Rogero's newest pup file this is all patched
------>Rogero_CEX4.30_V1.00 Full Pack
PUP MD5: 7ADF524594D46EF669F4C64E07462631 --->

[Byr88]

I'm on WutangRZA 3.55 CFW and I can't seem to get the toggle qa pkg to install, the ps3 just returns "An error occurred during the install operation (80029567)". Has anyone else gotten toggle qa to install on WutangRZA? Also, if toggle qa is not an option should I attempt installing Rogero 3.55 v3.7 from the Recovery Menu anyway or is that likely to result in a brick? I'm on a bc cech model...

[windrider42]

From WutangRZA 3.55 CFW I would install 3.55 OFW, then install Kmeaw 3.55 and then you should be ablle to run qa flag.

[Byr88]

is there a proper way to do it or can I just install 3.55 OFW from Recovery Menu?

[CaptainCPS-X]

Originally Posted by windrider42 Nice tutorial CaptainCPS-X I copied it over to Tortuga-cove with source included Just want to say about this part Tips #5 – Finally, while on CFW 4.30, Install multiMAN v04.08.01 and PS3~dev_blind.zip provided by Rogero at Tortuga Cove. 1- Install multiMAN from XMB 2- Activate “write access” to “dev_flash” on multiMAN settings 3- Go to mmOS / file manager and locate the PS3~dev_blind.zip and double click it (pressing X twice) 4- Follow on-screen instructions and restart your PS3. Its actually 3- Install multiMAN ver 04.08.01 from XMB. 4- Start multiMAN and Press [Select+Start] to open File Manager screen (MMOS) 5- Using the Right analog Stick Double click the first Icon "PS3 Root" to open it. 6- Select "dev_usb000" from the window that opened, and Double click it. 7- Select the file "PS3~dev_blind.zip" and Double click it. 8- A confirmation Message will appear, select "Yes" to install it. No need for Activate “write access” to “dev_flash” on multiMAN settings And if you downloaded Rogero's newest pup file this is all patched ------>Rogero_CEX4.30_V1.00 Full Pack PUP MD5: 7ADF524594D46EF669F4C64E07462631 --->

Thanks man, I made a small note previously about the latest Rogero CFW pack not requiring any patching, but I appreciate that you give a refreshing note about it

SeeYa!