[4DoorITR]

From what I read the 360 clips really aren't reusable and for the price they should be!

[MJ999]

Originally Posted by v8s10 I'd like to see how a QSB would work on a NAND ps3 too...I have my doubts about one ever coming out.

QSB's won't support on NAND PS3

[xerxesrex]

Originally Posted by Kazrael21 http://www.vgcrepairs.biz/progskeet-...progskeet-v1.2 Use this coupon code to save some money too :WeBrewWii -I got it cheaper than advertised haha. ************* [ - Post Merged - ] ************* So I have 3 NAND models I am trying to recover from bad flashes, so i guess I dont need the address lines...Ill still be e-mailing progskeet to get those and I will post whatever replies I get here. so I guess its because I am still very new at this but this is whats confusing me when I try to connect my chip: NAND1 Connection:7 Data signals P41 = IO7 / DQ7 P40 = IO6 / DQ6 P39 = IO5 / DQ5 P38 = IO4 / DQ4 P37 = IO3 / DQ3 P36 = IO2 / DQ2 P35 = IO1 / DQ1 P34 = IO0 / DQ0 Control signals P09 = CLE P08 = ALE P07 = WE P06 = RE P05 = CE_A P04 = WP P03 = CE_B P02 = R/B# NAND2 Connection: Data signals P49 = IO15 / DQ15 P48 = IO14 / DQ14 P47 = IO13 / DQ13 P46 = IO12 / DQ12 P45 = IO11 / DQ11 P44 = IO10 / DQ10 P43 = IO9 / DQ9 P42 = IO8 / DQ8 Control signals P33 = CLE P32 = ALE P31 = WE P30 = RE P29 = CE_A P28 = WP P27 = CE_B P26 = R/B# **** I dont know what Im looking at .. A picture tutorial would be Ideal or if someone could explain what Im looking at. ************* [ - Post Merged - ] ************* @baileyscream what else do I need? this is everything I have.

Thanks mate. Shall give it a try.

[jeeqer]

hi all, need to know if progskeet can fix may ps3 on ofw 370 with red screen of death problem. need your respond to know what hardware to buy, thanks.

[d0nc0l0]

I'm getting my v1.2 tomorrow but by reading i see i need to buy the 360clips too? btw i have a ps3 slim nor.

[Jotown]

hello to all,
i´ve got a problem.

the descripion:

i wnat to run winskeet and check for shortcuts, but the problem is when i connect progskeet 1.2 via 15 pin cabe to the slaveboard and via usb to my pc (using win7) i can´t install the driver. i get every time the message unknown device (i used the driver packege from progskeet downloading source)
and the led on the slaveboard is very very slightly glowing.
so i need some help

thanks to all

[Kazrael21]

Originally Posted by Jotown hello to all, i´ve got a problem. the descripion: i wnat to run winskeet and check for shortcuts, but the problem is when i connect progskeet 1.2 via 15 pin cabe to the slaveboard and via usb to my pc (using win7) i can´t install the driver. i get every time the message unknown device (i used the driver packege from progskeet downloading source) and the led on the slaveboard is very very slightly glowing. so i need some help thanks to all

the dim glowing light is fine, mine was the same way, and make sure you installed the bitstream as well... If you start reading this thread from the beginning it may help you, since I had everyone is having the same problem figuring this new v1.2 progskeet out...BTW if it says you tested positive for shorts post back here. I dont think the shorts error is a problem after talking with uf6667 about it, but he never answered my question about why it tests positive or why it wasnt something he should have put up on the progskeet homepage; anyway hope it works out for you.

[d0nc0l0]

Originally Posted by Kazrael21 the dim glowing light is fine, mine was the same way, and make sure you installed the bitstream as well... If you start reading this thread from the beginning it may help you, since I had everyone is having the same problem figuring this new v1.2 progskeet out...BTW if it says you tested positive for shorts post back here. I dont think the shorts error is a problem after talking with uf6667 about it, but he never answered my question about why it tests positive or why it wasnt something he should have put up on the progskeet homepage; anyway hope it works out for you.

do you got to downgrade using the v.1.2?

[Kazrael21]

No I havent downgraded yet, im still waiting on my 360 clips to arrive, ill post here when they come in to let everyone know how it went

[d0nc0l0]

Originally Posted by Kazrael21 No I havent downgraded yet, im still waiting on my 360 clips to arrive, ill post here when they come in to let everyone know how it went

do i need the 360 clips for a slim??