[h_baz]

but the update appears in xmb

[h_baz]

I solved my problem

I formatted internal hdd and everything is ok!!

Thanks

[Haterpr00f]

I need hel guys. So I installed e3 flasher on my ps3 slim and followed the tutorial to the point where I need to use jailbreak dongle and mine is amazebreak and I heard that it might be just for fat ps3's so when I press the power and the eject button the ps3 starts and doesn't shut down by itself. Should I look for to buy another dongle or can you tell me how to start everting over from the beggining???

[MJ999]

Originally Posted by Haterpr00f I need hel guys. So I installed e3 flasher on my ps3 slim and followed the tutorial to the point where I need to use jailbreak dongle and mine is amazebreak and I heard that it might be just for fat ps3's so when I press the power and the eject button the ps3 starts and doesn't shut down by itself. Should I look for to buy another dongle or can you tell me how to start everting over from the beggining???

When you press the Power+Eject combination you will hear 4 beeps, and you should INSERT THE AMAZEBREAK TO THE RIGHT USB PORT ONLY, if you do this steps correctly the ps3 may turn off.

[Haterpr00f]

I do press this combination and I do hear four clicks but the ps3 just starts and goes to the "please connect the controller with usb..." screen.
Can I somehow start everything from the beggining :D

[MJ999]

Originally Posted by Haterpr00f I do press this combination and I do hear four clicks but the ps3 just starts and goes to the "please connect the controller with usb..." screen. Can I somehow start everything from the beggining :D

It's not the problem of PS3, but the dongle itself.

Did you update your Amazebreak with latest FW ? if not, it won't work.

[Haterpr00f]

well I cant update it because when I try to with the software from the original site i get message "Amaze_Reset_To_ISP fail !"

[Tribes11]

What isn't clear enough as ALWAYS on every E3 Flasher tutorial I see is if E-Sata Station is NEEDED for downgrade process or not????

Also, can I remove everything after this tutorial finishes? I mean, remove all the hardware from E3 flasher and make console feels like it has never been updated to 3.6+? It will become a 3.55 again like it was never updated, right? Or it still have "memory" that it once was updated somewhere in the PS3?

I ask this because I remember I never had to do QA Toggle when I was on CFW3.55 I tested many CFW and all I did was, flashing back OFW3.55 and updating to the 3.55CFW I wanted, Kmeaw, Rogero or Rebug... this will be the same process after the downgrade and removal of E3 Flasher?

Thanks in Advance.

[arcadekidflo]

Anyone encountered problems with the CECHH series ( DIA-001 MB ) ?
I tried to do mine and it bricked although backup seemed fine
Please check and evaluate the backup http://www63.zippyshare.com/v/94062166/file.html

[lrtopshot]

Originally Posted by jarmster Hey player....I got my flasher installed no problem but im having some issues getting the dual boot to work...The flasher use to be in another ps3 at one point and the onboard nor was already flashed with 3.55 cfw... I was following the dual boot guide but when it says to flip the switch to cfw, the ps3 would not boot. I left the ps3 on ofw and downgraded it and the installed ofw 3.55 and the upgraded it 4.21 cfw. Worked good.... This is where my confusion starts...I wanna flash the onboard nor with this cfw...I flipped the proper switches and hit start..Everything went well i thought.. I powered down the ps3, flipped it back to ofw and swapped the drive....It would not boot. I could not get it to boot no matter what i did...swithing the dives back, flippin the switch to cfw again...nothing seemed to work. I then followed your guide and got it back to where i was.... all switches are down, cfw 4.21 is installed and i dont know which is the right way to set up the dual boot from here. can you give me a hand?

hi did you manage to get the dual boot to work?