[Kazrael21]

Originally Posted by Inali I can't get my Progskeet 1.2 working on PC :/ Well, half working. This is what I did so far: 1. Install the Infectus driver for Injectus --> connected Injectus via usb to PC WITH PROGSKEET ATTACHED (didn't know I needed it not attached...) 3.Load the Bitstream with the Infectus Programmer. 3. When it´s done disconnect it from the PC and connect the Slaveboard instead the Injectus. Then connect it to the PC Aaaand, nothing happens. PC doesnt detect new hardware. At all. On any usb port. I think my slave board is busted? It looks okay. I tried connecting only INJECTUS to pc, and it works, and the progskeet main board must work, as I already programmed the newest bitstream to it... Help please!! I can take pics if needed. Running Windows 8 Pro x64

install usb drivers..search them on progskeets home page
************* [ - Post Merged - ] *************
http://www.progskeet.com/forum/viewt...hp?f=10&t=3727

[Inali]

Originally Posted by Kazrael21 install usb drivers..search them on progskeets home page ************* [ - Post Merged - ] ************* http://www.progskeet.com/forum/viewt...hp?f=10&t=3727

Pretty hard to install drivers for something that doesn't show on device manager. Thank you, but I'm not stupid. My PC doesnt "not recognize it" it flat out does not see it period, like I never plugged it in. Therefor, impossible to install drivers.

[Kazrael21]

Originally Posted by Inali Pretty hard to install drivers for something that doesn't show on device manager. Thank you, but I'm not stupid. My PC doesnt "not recognize it" it flat out does not see it period, like I never plugged it in. Therefor, impossible to install drivers.

well you need to be more clear, my pc "did not recognize it" either so i had to mannually install the drivers and i got mine working this way
************* [ - Post Merged - ] *************
well if your not getting "USB not recognized' on your pc then contact your seller with the situation they may request you send back the slave board *or entire set* and send you a replacement

[Inali]

Originally Posted by Kazrael21 well you need to be more clear, my pc "did not recognize it" either so i had to mannually install the drivers and i got mine working this way ************* [ - Post Merged - ] ************* well if your not getting "USB not recognized' on your pc then contact your seller with the situation they may request you send back the slave board *or entire set* and send you a replacement

Because when I said "PC doesnt detect new hardware. At all." in my previous post, thats not clear enough for you to help you understand that it doesnt see it? Fail kid.

[Kazrael21]

Originally Posted by Inali Because when I said "PC doesnt detect new hardware. At all." in my previous post, thats not clear enough for you to help you understand that it doesnt see it? Fail kid.

do want to argue or do you want help? because it seems like you just want to bit(h? i see what you said in your post thats y i edited my last comment. contact your seller and notify them of your problem or if you have access to another computer try it. but it sounds like it is a problem with your slave board.
P.S your welcome for the help since no one else has posted yet, but helpful tip for future reference if someones trying to help, just dont be a di(k it doesnt help.
************* [ - Post Merged - ] *************

Originally Posted by d0nc0l0 How you able to get your pc to recognize the progskeet? I'm having the same issue the guy that comment on top of my post is having... Yhx for your help

make sure you install usb drivers..search them on progskeets home page

http://www.progskeet.com/forum/viewt...hp?f=10&t=3727

[Decoy]

Originally Posted by d0nc0l0 can you tell me is ps break dongle can be use for fsm?? i already have the v.1.2 and i'm ready to do it but i'm still have some questions... u know a tutorial using the v.1.2 ?? do you have a like a pic of the motherboard where the pins go?? with labels?

If your motherboard is ver-001 then this is where the pins must go , if its not, google your motherboard .. And don't forget to see the pinout of progskeet 1.2 to know where to solder .

[MJ999]

Originally Posted by Decoy If your motherboard is ver-001 then this is where the pins must go , if its not, google your motherboard .. And don't forget to see the pinout of progskeet 1.2 to know where to solder .

you can't solder the progskeet to that pins, it won't work.

[Decoy]

Why it wont work???

[Stolas]

Well I tried soldering the v3.3 together, but I still only get unknowns when I click the auto button. This sucks! I was hoping for a quick downgrade solution :P

[Kazrael21]

Originally Posted by Stolas Well I tried soldering the v3.3 together, but I still only get unknowns when I click the auto button. This sucks! I was hoping for a quick downgrade solution :P

Do you have a NAND mobo? did you make sure to install the new bitstream, usb drivers on the progskeet webpage? make sure you use some cleaning alcoohol and a clean toothbrush(any clean brush) to cean the pins. im in the same situation as you but just want to make sure youve tried all these solutions, and if your using a 360clip it difficult to make it sit flush with the board due to all the tiny resistors aligned around the NAND chip so make sure you file the 360clip just enough so it sits flat against the motherboard. try some ofl these and see if it works