[edokassiah]

ok so im planning on buying a progskeet but of course no help from the progskeet forums

i have a slim that im able to downgrade but what exactly do i need to buy?
so far its the progskeet with an injectus
what else am i gonna need?

sorry for the n00bish ???
also anyone have any clear instructions on how to dual boot it?

[Sarah1331]

Progskeet
avr board
USB stick
A console able to be downgraded

[edokassiah]

so a progskeet v1.2 with an injectus
i have a e3 card reader dongle
and a flash drive
anything else
i have a ps3 slim able to downgrade it came from factory with ofw prior to 3.55
anything else?

[MJ999]

Originally Posted by edokassiah so a progskeet v1.2 with an injectus i have a e3 card reader dongle and a flash drive anything else i have a ps3 slim able to downgrade it came from factory with ofw prior to 3.55 anything else?

Nothing else, :D

[bennyoo0]

Can't find much info on forums either this is the cheapest i've found it http://www.elitasia.com/ProgSkeet-V1.2 does that have everything one would need?
besides the QSB boards for dual booting also I have a phat NAND ps3

[MJ999]

Originally Posted by bennyoo0 Can't find much info on forums either this is the cheapest i've found it http://www.elitasia.com/ProgSkeet-V1.2 does that have everything one would need? besides the QSB boards for dual booting also I have a phat NAND ps3

Yep, but you have to buy the FULL Package then only you will get injectus jtag programmer, you have to program the progkseet using injectus.

QSB board's aren't yet released, so you should use 360 Clip or you can directly solder it to the nand chip legs.

If you are planning on dual-booting, you should buy NAND PCB 1Gbit,

[bennyoo0]

Sounds awesome so if I get the FULL package and a 360clip and follow this guide http://www.ps3hax.net/showthread.php...584#post387584 it would be completely solderless on 1.2 or do I need a dongle, would cobra usb work? I just want to fix my cecha and ceche for now so i think ill hold on the PCB for now

[MJ999]

Originally Posted by bennyoo0 Sounds awesome so if I get the FULL package and a 360clip and follow this guide http://www.ps3hax.net/showthread.php...584#post387584 it would be completely solderless on 1.2 or do I need a dongle, would cobra usb work? I just want to fix my cecha and ceche for now so i think ill hold on the PCB for now

Yes, you will need a dongle, I recommend e3 card reader, but cobra may also work.

[sonic34]

hey bennyoo0 great find on the progskeet i was checking out dizitopz.com and they wanted like 84 dollars for the full package and this website is the progskeet is cheaper

[edokassiah]

ok what else is needed tho? or is there something on the chip itself that will handle either nand or nor?

ps if your in the us vgcrepairs has them also