[westlers]

Hi there . Ive recieved my e3 limited edition box , but there is no NOR clip inside , only e3 linker , so can someone tell me plz what to do with that e3 linker . Thanks.

[Bigbones87]

With the linker you have to solder all the points to the motherboard. There are pinouts on the devwiki.

[D1st0rt3dM1nd]

Originally Posted by westlers Hi there . Ive recieved my e3 limited edition box , but there is no NOR clip inside , only e3 linker , so can someone tell me plz what to do with that e3 linker . Thanks.

You sure it was the limited. I have ordered 2 of the limited and both came with clips.
If they are then they should owe you one.

My opinion though is the linker is the best route. The clips are a piece of Sh*t

[westlers]

Yes its Limited Edition , cause all parts are inside , only clip is missing . Can you give me link to some tutorial how to solder e3 linker mate ?

[D1st0rt3dM1nd]

we need to know what version PS3 you have first

[westlers]

Oh right . I have CECHM03 model .

[D1st0rt3dM1nd]

Here are the points on the linker, match them up with the points on your motherboard
Scroll about half way down and you will see what Im talking about
http://www.ps3devwiki.com/wiki/Hardware_flashing

Then look on here and see where are the points are for the motherbord, I hope you have some steady hands and a lot of patience.

By the looks of things your motherboard should be a Ver-001 but MAKE SURE!
Here is the pinout for that version
http://www.ps3devwiki.com/wiki/File:...1_NOR-3.3V.JPG

here is another image of the board as well but this one does not show the location of Tristate
http://www.ps3devwiki.com/wiki/File:Ver-001_nor-rev.jpg

[ipth611]

Where did you buy this "limited version"

[westlers]

Ive bought it from ebay .

[mrc1978]

Originally Posted by D1st0rt3dM1nd Here are the points on the linker, match them up with the points on your motherboard Scroll about half way down and you will see what Im talking about http://www.ps3devwiki.com/wiki/Hardware_flashing Then look on here and see where are the points are for the motherbord, I hope you have some steady hands and a lot of patience. By the looks of things your motherboard should be a Ver-001 but MAKE SURE! Here is the pinout for that version http://www.ps3devwiki.com/wiki/File:...1_NOR-3.3V.JPG here is another image of the board as well but this one does not show the location of Tristate http://www.ps3devwiki.com/wiki/File:Ver-001_nor-rev.jpg

HOLY CR@P

just had a look at those pics and jesus im glad i dont need to use one. gunna be careful now as i do not want to be in that situation to need one.