[bartez82]

Hi, I bought PS3 with Rogero 4.21 brick.I dump it NOR with no problem,then patched and successful ubrick with flash fun mode.Problem is when I turn off PS3 for a while and turn back this brick comeback again .This happend every time after I fix it.
This is my nor dump,can any one check it?
LINK

[MJ999]

Well, your dump needs byte reversing, Byte reverse your dump using flowrebuilder and then patch it.

Good Luck :D

[haz367]

well.personally i think... if u buy a f*ckup from someone else knowing it can be saved we expect u can fix it on ur own j/k , anyway what a bargain to bad that never happens arround my area....but why "byte reverse it" lol..add some more confusion...it is good as is

[raddog]

Originally Posted by haz367 well.personally i think... if u buy a f*ckup from someone else knowing it can be saved we expect u can fix it on ur own j/k , anyway what a bargain to bad that never happens arround my area....but why "byte reverse it" lol..add some more confusion...it is good as is

tHATS THE SAME PROBLEM I HAD MONTHS AGO AND I DO DOWNGRADE SERVICES FOR PPL IN MY COUNTRY....AND IT HAPPENED WITH MY OWN PS3.I KNW I HAD A GD VALID DUMP FOR IT,USED PREVIOUSLY TO UNBRICK IT....AND NOW EVERYTIME I FLASH THAT GD DUMP BACK IT DOSENT COME ON WHEN I FINISH FLASH IT,IT WORKS ONLY WHEN I PUT MY E3 FLASHER BUT WHEN I TAKE IT OUT....IT STOPS WORKING,AND NOW AM BAFFLED AS TO WHY THIS IS HAPPENING AND I KNW OF SOME PPL WITH THAT SAME PROB MAYBE THE E3 HAS A FLASHING LIMIT OR SOMTING OR I MESSED UP MY BOARD.BUT DONT LAUGH AT SOMEONE U DONT KNW ANYTHING BOUT WHAT THEY ARE GOING THROUGH IF U DONT KNW THEN DONT REPLY SIMPLE....

[bartez82]

Originally Posted by MJ999 Well, your dump needs byte reversing, Byte reverse your dump using flowrebuilder and then patch it. Good Luck :D

Byte reversing and flash with flash fun mode or normaly?

Originally Posted by haz367 well.personally i think... if u buy a f*ckup from someone else knowing it can be saved we expect u can fix it on ur own j/k , anyway what a bargain to bad that never happens arround my area....but why "byte reverse it" lol..add some more confusion...it is good as is

I knew that but I bought this PS3 for my brother.He wants play backup as well.I pay for this console around 40euro.I hope I can fix it but none of this. @haz367 ,can U check my NOR dump?

[raddog]

Originally Posted by bartez82 Hi, I bought PS3 with Rogero 4.21 brick.I dump it NOR with no problem,then patched and successful ubrick with flash fun mode.Problem is when I turn off PS3 for a while and turn back this brick comeback again .This happend every time after I fix it. This is my nor dump,can any one check it? LINK

DONT WORRY I HAVE THE SAME EXACT PROB WITH U MY PS3 WHICH IS JUST SITTING THERE,AND TRUST ME THE PS3 IS GD...IT FLASHED OK BUT WE NEED TO FIND OUT WHAT IS CAUSING THIS....

[bartez82]

Originally Posted by raddog tHATS THE SAME PROBLEM I HAD MONTHS AGO AND I DO DOWNGRADE SERVICES FOR PPL IN MY COUNTRY....AND IT HAPPENED WITH MY OWN PS3.I KNW I HAD A GD VALID DUMP FOR IT,USED PREVIOUSLY TO UNBRICK IT....AND NOW EVERYTIME I FLASH THAT GD DUMP BACK IT DOSENT COME ON WHEN I FINISH FLASH IT,IT WORKS ONLY WHEN I PUT MY E3 FLASHER BUT WHEN I TAKE IT OUT....IT STOPS WORKING,AND NOW AM BAFFLED AS TO WHY THIS IS HAPPENING AND I KNW OF SOME PPL WITH THAT SAME PROB MAYBE THE E3 HAS A FLASHING LIMIT OR SOMTING OR I MESSED UP MY BOARD.BUT DONT LAUGH AT SOMEONE U DONT KNW ANYTHING BOUT WHAT THEY ARE GOING THROUGH IF U DONT KNW THEN DONT REPLY SIMPLE....

I have to same problem,with E3 flasher in side works perfectly but after i take it off works only till first startup.

[haz367]

the dump is complete..all per console info..with firmwares 3.41/3.42 on flash, the bkpps3.bin posted in maintopic is correct for E3 use, it's dumped using it = FI.I header @ offset 200

here's a patched 355 coreos bkpps3.bin(rename it) use as normale downgrade procedure (1UP-rest DOWN) - power off normal - switch 6UP - power on - connect controller?? - power off at the back - trigger fsm - install Rogero 3.7
http://rghost.net/41482948

[bartez82]

Originally Posted by haz367 the dump is complete..all per console info..with firmwares 3.41/3.42 on flash, the bkpps3.bin posted in maintopic is correct for E3 use, it's dumped using it = FI.I header @ offset 200 here's a patched 355 coreos bkpps3.bin(rename it) use as normale downgrade procedure (1UP-rest DOWN) - power off normal - switch 6UP - power on - connect controller?? - power off at the back - trigger fsm - install Rogero 3.7 http://rghost.net/41482948

So U want me to flash this dump in flash fun mode or normal flash?Can U tall me how do U check from wich firmware is my dump?
regards

[haz367]

and u have made e3 guides? u should know ur way..edit... j/k alright yeah bad jokes

i dont want u to do anything..it's ur decision...the patched dump atleast is properly patched with 355 ready for downgrade/fixing a ps3 IF this dump is fromt hat PS3 and IF the PS3 isn't borked/hdd etc broke

checking firmware v in coreos can be done may ways, 1 of them is extract the dump, go into each ros folder and open "sdk_version" with notepad....

goodluck on fix