[razblade77]

Originally Posted by razblade77 ok thanks for the guide , im at the one key downgrade stage, one thing find strange is it tells you to delete everying on sd card and put e3downgrade.bin on sd card, surely you need your bkpps3.bin and e3downgrade.bin or im i worng and you only need the e3downgrade.bin?

anyone? really want to make sure before i flash?

[MJ999]

Originally Posted by razblade77 anyone? really want to make sure before i flash?

You should rename your patched dump to bkpps3.bin according to @playerkp420 .

You can follow his tutorial : http://www.ps3hax.net/showthread.php?t=33989

[4DoorITR]

I'm at my ****ing wits end with this Progskeet 1.2 and Spansion NOR. I have already gotten a good dump but the only way I was able to was powering the NOR with the PS3. It goes RLOD in about 4 secs but I was still able to dump. Bailey has told me that I can flash a real YLOD. The problem is that I can't write back without verification errors. Is it because I can't halt correctly? How do I power the NOR without the PS3 power supply? Powering it with Progskeet doesn't seem to work or I'm doing something wrong.

[MJ999]

Originally Posted by 4DoorITR I'm at my ****ing wits end with this Progskeet 1.2 and Spansion NOR. I have already gotten a good dump but the only way I was able to was powering the NOR with the PS3. It goes RLOD in about 4 secs but I was still able to dump. Bailey has told me that I can flash a real YLOD. The problem is that I can't write back without verification errors. Is it because I can't halt correctly? How do I power the NOR without the PS3 power supply? Powering it with Progskeet doesn't seem to work or I'm doing something wrong.

Power the NOR using ATX PSU,

Refer this http://www.ps3devwiki.com/wiki/Talk:Progskeet_1.0_/_1.1

[3absiso]

@MJ999

Originally Posted by MJ999 Power the NOR using ATX PSU, Refer this http://www.ps3devwiki.com/wiki/Talk:Progskeet_1.0_/_1.1

i am thinking of doing it next time i am doing the downgrade.
the PS3 flash will be powered by the ATX PSU,
my question: the 3.3V and ground points going to the ATX PSU are the same are indicated on the Ps3 Mobo Diagram?

[rastadallas]

I really need some advice. I've been getting the 10001100 error now. I know that i is about that the clip is not getting enough contact. I've been trying everything, change it's possition like 15times. Put some coins on it. I don't know what to do...
Edit: tried to update again, if it could be that. The update was successful but still same error.
Edit2: I don't have to update every time i reconnect the nor clip right?

[MJ999]

Originally Posted by 3absiso @MJ999 i am thinking of doing it next time i am doing the downgrade. the PS3 flash will be powered by the ATX PSU, my question: the 3.3V and ground points going to the ATX PSU are the same are indicated on the Ps3 Mobo Diagram?

Never tried powering the NOR using ATX PSU.

Yep, It might be same.
************* [ - Post Merged - ] *************

Originally Posted by rastadallas I really need some advice. I've been getting the 10001100 error now. I know that i is about that the clip is not getting enough contact. I've been trying everything, change it's possition like 15times. Put some coins on it. I don't know what to do... Edit: tried to update again, if it could be that. The update was successful but still same error. Edit2: I don't have to update every time i reconnect the nor clip right?

Maybe the clip is busted,

You don't have to update every time.

I had this problem before, If you know soldering, Use progskeet.

[sREa]

Is it true you can downgrade from 4.31? Some schmuck from a store that downgrades/hacks/mods your consoles told me it was a lie. I'd rather believe this hard working guide writer here.

I've got a Phat 60GB console (EUR)

[Sarah1331]

Originally Posted by sREa Is it true you can downgrade from 4.31? Some schmuck from a store that downgrades/hacks/mods your consoles told me it was a lie. I'd rather believe this hard working guide writer here. I've got a Phat 60GB console (EUR)

Yes you can downgrade

[jensen76]

i have recovert my nand konsol from brick whit rogero 4.21 v1.02..... followed the guide and i now works again but i cant dehash.. every time i go in recovery menu at chose 6 then it fails to indstall and gives me an error and hangs ind a constant update loop???

i then hafe to go in service mode and use rogero 3.7 to get out of the opdate loop.all is working fine on rogero 3.7 but i just cant dehash so i can opdate to rogero 4.30 v2.0 ore 4.21 v2.0......


this is taken from rogero
4.21 v2.00
- Same Features as CEX_4.30 v2.00 plus the following add-ons:
1- It does have the default "Install Package Files" node on XMB. (no need to have multiMAN installed before using it)
2- It does have LV1 Checks Disabled and can be used directly instead of Rogero3.55 v3.7 while downgrading with Hardware Flashers.
3- It does have the Proper Cinavia Disabled Files for the users who needs it.

how to use the 4.21 v2.0 directly instead of Rogero3.55 v3.7? to indstall 3.7 we use service mode and how are we getting out of service mode on 4.21 v2.0? that isent posible is it? ore am i missing somthing...

thanks fore the great guide...