[playerkp420]

Originally Posted by Pacha56 Where can I get this E3 Flasher?

You could always try CLICK HERE.

[Pacha56]

I know how to use google. I just don't want to get a fake or a copy.

[playerkp420]

Originally Posted by Pacha56 I know how to use google. I just don't want to get a fake or a copy.

Well the first link is their official site. Go to it and click on distributors.

Not sure about the second link.

The 3rd link is one of the most famous mod shops online.

I got mine from coolgadgetsgift.com

[vhong1981]

Hey guys can someone post a working link to eclips3 firmware updater v1.5 as I've searched everywhere and can't find any working links or if someone could upload it somewhere and pm me even that would be a huge help I need to setup my dongle to allow me to get into service mode

[bigfishbad]

Originally Posted by playerkp420 2. Put the e3 10-28 update.bin file onto the root of your sd card. (I use this update.bin to update the flasher, because it will allow you to flash multiple ps3's

1st of all excellent tutorial used this one and @Khalkedon video tutorial (visual aid)

this is were i went wrong
(my mistake BUT i think other people have done the same)
it says use the e3 10-28 update.bin i had downloaded mine from the e3 site and it kept giving me errors during the dump the log kept saying something about the bio's and not original ps3 and the only answer's google was throwing up was either re connect the chip or to update to samsung update multi consoles BUT i thought i already had it from the e3 site

then i read somewhere to try the 3rd and 5th switch up and rename the dump to pss3.bak (or watever cant remember now) ANYWAY it made the dump so it was defo connected right so i started to think wat was the problem then i downloaded the multi console update from devwiki and it had a different MD5 from the 10-28-2011 update.bin from e3 so i updated the flasher again

LOOOOOOOONG story short it worked after that so hopefully someone else reads this and it helps them to

MD5 from multi console update :8D1A10F45049B5DC1223D6008ED238DD
(this one worked for me)


MD5 from the 2011.10.28 update from e3 website :9A135131F80D48823FC44DCE55771364

^^^^^^^^^^^^^
this update didn't work even tho i only just bought the flasher and AYE only put it on my own ps3 (not any other one) it kept giving me the error in the text.log saying wrong bio's or something

[playerkp420]

Originally Posted by bigfishbad 1st of all excellent tutorial used this one and @Khalkedon video tutorial (visual aid) this is were i went wrong (my mistake BUT i think other people have done the same) it says use the e3 10-28 update.bin i had downloaded mine from the e3 site and it kept giving me errors during the dump the log kept saying something about the bio's and not original ps3 and the only answer's google was throwing up was either re connect the chip or to update to samsung update multi consoles BUT i thought i already had it from the e3 site then i read somewhere to try the 3rd and 5th switch up and rename the dump to pss3.bak (or watever cant remember now) ANYWAY it made the dump so it was defo connected right so i started to think wat was the problem then i downloaded the multi console update from devwiki and it had a different MD5 from the 10-28-2011 update.bin from e3 so i updated the flasher again LOOOOOOOONG story short it worked after that so hopefully someone else reads this and it helps them to MD5 from multi console update :8D1A10F45049B5DC1223D6008ED238DD (this one worked for me) MD5 from the 2011.10.28 update from e3 website :9A135131F80D48823FC44DCE55771364 ^^^^^^^^^^^^^ this update didn't work even tho i only just bought the flasher and AYE only put it on my own ps3 (not any other one) it kept giving me the error in the text.log saying wrong bio's or something

I am not sure what update.bin you were using. But it wasn't the Samsung 10.28 update.bin. Because it hasn't been on the e3 site for a long time. They took it down way back in Jan. of 2012 or maybe sooner.
There is a link to it in the downgrade any pack, in the spoiler things you will need.
Sometimes that is the only update.bin that will work. Because if you make a backup and the clip is not on secure, the flasher thinks you used it on a different PS3. Because the metldr and bootloader was not read correctly.

[vhong1981]

Originally Posted by vhong1981 Hey guys can someone post a working link to eclips3 firmware updater v1.5 as I've searched everywhere and can't find any working links or if someone could upload it somewhere and pm me even that would be a huge help I need to setup my dongle to allow me to get into service mode

Nevermind after 2 days of searching I've finally found it thanks anyways

[angad16]

Hey guys,
I was following the youtube video to downgrade a slim ps3 (mine is cech-2001a) when I noticed that my nor chip was horizontal instead of vertical. I installed the e3 clip anway and proceeded. However, Now when my ps3 boots up, the lights on the e3 flasher flicker couple of times( all of them together at the same time) and when the boot process is complete, there are no lights at all on the e3 board. PS3 boots up fine though.

I was following this link:
E3 FLASHER INSTALLATION and DOWNGRADE TUTORIAL (Khalkedon) - YouTube

and here is a link to how I attached the nor clip
http://flic.kr/p/dwVrcq

This is my first post, so if I missed anything or broke any rules, sorry about that.

Thanks in advance

[playerkp420]

@angad16

The clip is on the right direction. But you will need to get the clip on more secure. The flasher gets its power from the nor chip. So your clip is not making a good connection.

You need to put pressure on the clip and tape it down real good. maybe use some foam or cardboard to put a permanent press on the clip.

Good luck.

[geeklogik]

Originally Posted by lrtopshot hi did you manage to get the dual boot to work?

http://www.ps3hax.net/showthread.php?p=489785