[imyourpapi]

? You have remove the battery and after the ps3 in YLOD???

[underwurlde]

Originally Posted by imyourpapi This is a picture of my mobo: The ps3 is now stay on ylod after remove the battery.. is possible?

Gordon Bennett! What a mess.

Try cleaning up those pads with some solder wick & then clean flux & crud off with PCB cleaner and a small stiff brush.

Your photo may be lying to me, but it looks like you've actually damaged the motherboard PCB in some areas?

Andy

[imyourpapi]

Other PCB areas is untouched, but before remove the battery, the ps3 is starting with black screen, now the ps3 is on YLOD!
EDIT: PS3 Is stay on RLOD! the Yellow led not view ---> RED -> POWER ON -> GREEN -> BEEP BEEP BEEP --> RED --> RED --> RED

[Mr.Dutch]

what about the solder and copper that came off, is the board trace still having contact (beginning and end) ?

follow the traces and measure resistance.

EDIT: maybe i am wrong and those traces are not passing through the solder points.

[imyourpapi]

The ps3 now is stay on YLOD XD , OMG you have found a problem! the traces is disconnected!!!

[Mr.Dutch]

Originally Posted by imyourpapi OMG you have found a problem!

no, problems always find me

you should also check the remaining solder points,it looks a bit messy to me , make sure solder is not contacting traces it should not be.

[imyourpapi]

Tonight i try to bypass the traces, with cable, i update you, thanks for help!

[baileyscream]

Originally Posted by imyourpapi This is a picture of my mobo: The ps3 is now stay on ylod after remove the battery.. is possible?

where to start
you have test points missing. these test points sit in the middle of a track so a missing point has in efect cut that track

so you have atleast 2 cut tracks.

the solder is still on the test pads and not in good shape either.
that solder needs removing via a solder wick or de-solder pump.

the board needs cleaning with alcohol wipes. a really good clean to.

there appears to be a big blob of solder above the contact strip (top left)
that needs removing

there is alot of work to be done on that board to get it back to normal once it is you should be able to finnish the downgrade.

[Mr.Dutch]

Originally Posted by baileyscream there is alot of work to be done on that board to get it back to normal once it is you should be able to finnish the downgrade.

i just hope there's not any damage done, it sort of looks like my first days in soldering.

not that i'm a pro now.

[imyourpapi]

I try with cut the traces?