[ps31d]

I just flash my ps3 using one-key downgrade, it seem flashing but after 3mins i got error code 10001111, after that i turn my ps3 off, now my PS3 cant turn on, when i turn it on it turn off automatically in 1 second, this is my log on sd card
http://www.mediafire.com/?45rr4qot5xz2tdb
Someone plz help.

[playerkp420]

Most likely the clip wasn't secure and stopped making good contact. Now your ps3 is bricked.

To restore your ps3 follow this.

You will probably have to reseat the clip and make sure it is secure.

[dracula1984]

10001111 is can't read MSD card, check your MSD card and try again! good luck!

[ps31d]

its failed to write to nor error, however, i unbricked it and nowmy PS3 running 4.30 v2 rogero, thx anyway

[atupac]

Hi there! My friend had tried alone to update his PS3 from CFW 3.55 kmeaw TO Rgoro 4.21 v1.9 (without QA-Flag and without MemDump :/ ) and bricked...

So using his E3-Flasher, he got the same problem: bad Cliping over the Flash-Chip.
Finally, all he got are some 3 dumps AFTER Bricking, but those dumps are bad because the "bootloader_0.bin" is 0 Ko :/ .

He tried the MemDump from another PS3 (with the exact same product serial), but black screen.

So, is there a way/hope of Unbricking it (rebuild bootloader maybe) ??

PS3 Infos: model: Fat/ Serial: CECHH04 / Mother Board: DIA-001

Thanks for help.
************* [ - Post Merged - ] *************
@ ps31d: Did you had a Memdump save to success in your Unbrick ??

Thanks.

[ps31d]

Originally Posted by atupac Hi there! My friend had tried alone to update his PS3 from CFW 3.55 kmeaw TO Rgoro 4.21 v1.9 (without QA-Flag and without MemDump :/ ) and bricked... So using his E3-Flasher, he got the same problem: bad Cliping over the Flash-Chip. Finally, all he got are some 3 dumps AFTER Bricking, but those dumps are bad because the "bootloader_0.bin" is 0 Ko :/ . He tried the MemDump from another PS3 (with the exact same product serial), but black screen. So, is there a way/hope of Unbricking it (rebuild bootloader maybe) ?? PS3 Infos: model: Fat/ Serial: CECHH04 / Mother Board: DIA-001 Thanks for help. ************* [ - Post Merged - ] ************* @ ps31d: Did you had a Memdump save to success in your Unbrick ?? Thanks.

I got a valid dump before bricked so i can easy flash it back to unbrick.

[playerkp420]

Originally Posted by atupac Hi there! My friend had tried alone to update his PS3 from CFW 3.55 kmeaw TO Rgoro 4.21 v1.9 (without QA-Flag and without MemDump :/ ) and bricked... So using his E3-Flasher, he got the same problem: bad Cliping over the Flash-Chip. Finally, all he got are some 3 dumps AFTER Bricking, but those dumps are bad because the "bootloader_0.bin" is 0 Ko :/ . He tried the MemDump from another PS3 (with the exact same product serial), but black screen. So, is there a way/hope of Unbricking it (rebuild bootloader maybe) ?? PS3 Infos: model: Fat/ Serial: CECHH04 / Mother Board: DIA-001 Thanks for help. ************* [ - Post Merged - ] ************* @ ps31d: Did you had a Memdump save to success in your Unbrick ?? Thanks.

Did you say he flashed a dump from a different PS3? Without having a valid backup of his?

He may have perma-bricked his PS3. You should never flash a nor dump, from a different console. It will flash over his per console info. And without having that info to flash back, the PS3 is a big, black, expensive, paper weight.

Their still is a chance, if the the clip wasn't on good enough to read the bootloader, then maybe it wasn't on good enough to flash over it.