[Jokerx7x]

its just blink red for a sec and nothing

[Bigbones87]

Originally Posted by Jokerx7x its just blink red for a sec and nothing

Sure you put the correct file in the correct folder?

[Jokerx7x]

PS3/UPDATE ?

[Bigbones87]

No. When you out the e3 card reader in the computer, 2 folders pop up. One will say e3 upgrader. Drag and drop the e3 card reader downgrade.bin file to that folder and the e3 card reader light will turn blue. Then put it in the right USB port of the ps3, switch the slower switch to off or pull the power cord, then plug it back in nd hit power eject right after another. The card reader should turn red then blue then the ps3 should shut off. May I ask reason for getting into fsm? You are downgrading right? Because if you get into fsm, only way out is to be on 3.55 or lower.
************* [ - Post Merged - ] *************

Originally Posted by Jokerx7x PS3/UPDATE ?

quote me when you respond

[popsktoy]

Originally Posted by Bigbones87 No. When you out the e3 card reader in the computer, 2 folders pop up. One will say e3 upgrader. Drag and drop the e3 card reader downgrade.bin file to that folder and the e3 card reader light will turn blue. Then put it in the right USB port of the ps3, switch the slower switch to off or pull the power cord, then plug it back in nd hit power eject right after another. The card reader should turn red then blue then the ps3 should shut off. May I ask reason for getting into fsm? You are downgrading right? Because if you get into fsm, only way out is to be on 3.55 or lower. ************* [ - Post Merged - ] ************* quote me when you respond

same problem here..

previous post from other thread..

'update.. bought an e3 card reader for FSM...

new problem.. eject button wont work.. doesn't beep when pressed.. doesn't light up when game cd inserted.. has to be ejected from xmb... cant enter FSM because of it!..

before restoring ps3 and successfully recovering from brick.. connector from mainboard where ribbon to power and eject button broke of.. when to my friend to reconnect the loosed part.. successful in making the power button work and went on to recovering from brick.. didn't notice about the blue led and eject problem until right now.. can anyone help if they experienced the same problem.. dont know of its a flasher related problem or a proper connector/soldering problem..

power button lights up and functions..

except for eject.. does not eject game cd when pressed.. does not light up when game cd inserted.. does not beep when pressed also..'

[carldenning]

@popsktoy

1) dont hijack someones else , special when your and op probems are diffent

2) your's problem is not the same as the op . get your eject button fixed then it will work !!

[popsktoy]

sorry.. my bad.. ill post it somewhere else or start a new thread

[Jokerx7x]

NVM i downgraded successfully now can you Recommend cfw


thanks for the help

[haz367]

nvm..already fixed..pls remove post

[gopromiller]

yeah,i think so,i downgraded successfully now can you Recommend cfw