[amined]

HELP ME PLEASE


I try to update the firmware from service factory mode then the ps3 is off
i have a full brick ... (watch the video bleow)

https://www.youtube.com/watch?v=q-9iNCh4KnQ

how can fix this problem ??
i have the good DUMP if i reflash with, it work or not ???

[Sarah1331]

If you have a good dump flash it back and it will work yes
Providing its not a hardware error

Sent from my iPhone 5 using Tapatalk

[amined]

Originally Posted by Sarah1331 If you have a good dump flash it back and it will work yes Providing its not a hardware error Sent from my iPhone 5 using Tapatalk

thank's for your reply
i use progskeet 1.1
i have already a good DUMP i try to flash again but always brick exist

[Sarah1331]

You cannot have a good dump or you have hardware error look for solder splashes


Sent from my iPhone 5 using Tapatalk

[amined]

Originally Posted by Sarah1331 You cannot have a good dump or you have hardware error look for solder splashes Sent from my iPhone 5 using Tapatalk

this is my DUMP for cheking

http://www.fileswap.com/dl/BOlAdpOP/

[MJ999]

I don't think it's the problem of the dump

It's a hardware issue.

[amined]

Originally Posted by MJ999 I don't think it's the problem of the dump It's a hardware issue.

are you verifyed the dump ??????

[MJ999]

Originally Posted by amined are you verifyed the dump ??????

Your dump is from a NAND ps3 right ?

[amined]

Originally Posted by MJ999 Your dump is from a NAND ps3 right ?

Yes is a nand

Now I flash again 3 times to be shure

I have a new problem now:
-black screen
-ps3key is not working only on this ps3
I tested on another ps3 is work fine

[amined]

my problem now is the ps3key

ps3key is not working only on this ps3
I tested on another ps3 is work fine