[mizan25]

PS3 (v4.3 Rogero CFW) (v2.03) (v4.31 spoofed)(60GB)--->Frozen

Hi my PS3 keeps freezing after the Rogero logo,
i have gone into recovery menu i have been through the process of rebuild database and restore system but still gets stuck after the rogero logo boots up..

I have tried reinstalling the CFW firmware but same problem occurs..

What shall i do...Please can someone help as i have posted various post threads but no one seems to reply..I dont mind changing HDD

Please Help .,.....


Thanks In advance

[flpmaia]

Check the md5 of rogero cfw file. Maybe corrupted file, download again and check the md5

[mizan25]

Originally Posted by flpmaia Check the md5 of rogero cfw file. Maybe corrupted file, download again and check the md5

How do i do that bro, what is md5..??

[flpmaia]

I'm on smartphone now, in 20 minutes I will post how.

With links and the MD5 of rogero cfw.

Ok?!

[mizan25]

Originally Posted by flpmaia I'm on smartphone now, in 20 minutes I will post how. With links and the MD5 of rogero cfw. Ok?!

Thanks Bro really appreciated..ill wait till then

[flpmaia]

Here you find the original thread from Rogero with a lot mirrors to download Rogero 4.30 V2.03 CFW and the MD5 of the file.
http://www.tortuga-cove.com/forums/viewtopic.php?t=4137


MD5: 5f7434a46f7909689b00558a06071689


Here you can download the MD5 Checker: http://download.cnet.com/MD5-Checker...-10410639.html

Its simple to make, in the MD5 Checker paste the MD5 cited above and browse the Rogero 4.30 V2.03 CFW file what you downloaded.

If the MD5 not match, don't install the firmware! It may brick your console!

[mizan25]

Originally Posted by flpmaia Here you find the original thread from Rogero with a lot mirrors to download Rogero 4.30 V2.03 CFW and the MD5 of the file. http://www.tortuga-cove.com/forums/viewtopic.php?t=4137 MD5: 5f7434a46f7909689b00558a06071689 Here you can download the MD5 Checker: http://download.cnet.com/MD5-Checker...-10410639.html Its simple to make, in the MD5 Checker paste the MD5 cited above and browse the Rogero 4.30 V2.03 CFW file what you downloaded. If the MD5 not match, don't install the firmware! It may brick your console!

Hi Thanks For the quick reply, ill have a look at it now..Thanks again
************* [ - Post Merged - ] *************

Originally Posted by mizan25 Hi Thanks For the quick reply, ill have a look at it now..Thanks again

Hi The Codes do match... what shall i do..thanks

[flpmaia]

Originally Posted by mizan25 Hi The Codes do match... what shall i do..thanks

You downloaded the firmware again or you checked the md5 of the file what you installed previously?

Because you have to install the firmware in recovery menu, but the firmware with correct md5

[mizan25]

Originally Posted by flpmaia You downloaded the firmware again or you checked the md5 of the file what you installed previously? Because you have to install the firmware in recovery menu, but the firmware with correct md5

I have already done that ...what shall i do now..??same problem

[flpmaia]

Originally Posted by mizan25 I have already done that ...what shall i do now..??same problem

downgrade to 3.55 OFW and upgrade again to Rogero 4.30 CFW



"- Downgrading back to 3.55 is always possible using the following steps :
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
...Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.
- After the Downgrader PUP installs you'll be on a hybrid CFW3.55 that will still shows the spoofed ver4.21 from system settings.
- In case you didn't have it Set Before, Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 and install "Rogero CEX-3.55 CFW V3.7" using the System Update from XMB.
- Once you're back on Rogero CFW3.55 v3.7 you can now install any CFW 3.55/4.21/4.30 using the System Update from XMB."

if doesn't work, you can try format the HDD. it's your last resort.