[toolz]

i need advice please, i was on Rogero CFW 4.30 v2.03 and then i went back to kmeaw with no problems, before i went to Rogero CFW 4.30 v2.03 i was on kmeaw with the 9.99 spoofer but i did not uninstall it, i just flashed rogero from xmb, now im back on kmeaw and i went to spoof again and all i get is black screen, i can get into recovery but it wont accept any cfw so i went to do a restore and again im at a black screen, is there a easy fix for this mess that i have made for myself?

[DEFAULTDNB]

Once you installed Rogero 2.03 your spoof on kmeaw will have been overwritten.

It cant be anything to do with what you previously had installed.

You should try the dehash/instal OFW 3.55 ideals and go from there.

[Ubefuct]

@toolz try rebug 999 downgrader after that rebug 3.55.3 then go to whatever firmware

[toolz]

Originally Posted by Ubefuct @toolz try rebug 999 downgrader after that rebug 3.55.3 then go to whatever firmware

i tried it but all i get in recovery is install 3.55 or higher? i press start and select and get that error
forgot to mention that after i went back to kmeaw i installed 9.99 spoof, and it hanged for a few seconds then i waited a while while it did its thing but i waited a long time so i hard reset

[DEFAULTDNB]

Can you reinstall 3.55 OFW.

You should be able to.

X:/PS3/UPDATE/PS3UPDAT.PUP

Check this out for dejavu:

http://www.ps3hax.net/showpost.php?p...&postcount=156 <- 3 weeks ago

Originally Posted by Ubefuct @toolz try rebug 999 downgrader after that rebug 3.55.3 then go to whatever firmware

@toolz reread that old thread and see if you can figure it out from there?

[toolz]

Originally Posted by DEFAULTDNB Can you reinstall 3.55 OFW. You should be able to. X:/PS3/UPDATE/PS3UPDAT.PUP

i will try again now
same error no applicable update data

[Ubefuct]

try the port closest to the bd drive, the 999 should work. Make sure there is no disc in the drive

[toolz]

Originally Posted by Ubefuct try the port closest to the bd drive, the 999 should work. Make sure there is no disc in the drive

tried it mate no luck

[Ubefuct]

The only other ideas I have are Flash it or try FSM.
Unless the file structure or naming is wrong on the usb. PS3UPDAT not ps3updatE

[toolz]

Originally Posted by Ubefuct The only other ideas I have are Flash it or try FSM. Unless the file structure or naming is wrong on the usb. PS3UPDAT not ps3updatE

I can only enter FSM i can not get into XMB due to black screen, no matter which ofw cfw i choose none will work i just get the error message saying no data