[baileyscream]

Originally Posted by armaan12 so untill the devs at progskeet relase the new bitstreem i wont be able to downgrade my nand ps3? also when i click auto it come up as 00000000 unknown on winskeet 40000 v11205

yes thats correct from what i have heard.

and it looks like the clip is not sat on the nand correctly (if this was the 1.1 version this IS the reason)
but as i dont have the 1.2 yet then you really will need to take your time amd check everything twice and twice more again.

as soon as it gets here i can start messing
1st create a propper guide
then try to mess things up so i can understand what fault points to what fix.
although that will probably happen as i'm trying to do the guide cos if something can go wrong then it will for me

[PureBlackNV]

are there any more downgrade services offered within the usa for nand cechg01

[Sarah1331]

Originally Posted by PureBlackNV are there any more downgrade services offered within the usa for nand cechg01

The only problem with NAND is if your console has badblocks more than a couple or just the one in wrong place flo rebuilder won't extract nothing and your stuck with a retail console and loss of postage


Sent from my iPhone 5 using Tapatalk

[donkey-punch]

ok I can't get any life into this flasher. I have the clip taped down nice and tight with a coin on top for extra pressure. When i power on the ps3 i get no lights on the flasher. I tried takin the clip off and turning it around but it will only go on 1 way due to the cable not lining up with the flash when the ps3 is put back together. Startin to lose patience with this now as I have been on since Saturday with this thing.

[ortis123]

Originally Posted by donkey-punch ok I can't get any life into this flasher. I have the clip taped down nice and tight with a coin on top for extra pressure. When i power on the ps3 i get no lights on the flasher. I tried takin the clip off and turning it around but it will only go on 1 way due to the cable not lining up with the flash when the ps3 is put back together. Startin to lose patience with this now as I have been on since Saturday with this thing.

i had once the same problem. if i recall it right try to update your e3 flasher. make sure to clean e3 ribbon and nor legs on mobo

[donkey-punch]

Originally Posted by ortis123 i had once the same problem. if i recall it right try to update your e3 flasher. make sure to clean e3 ribbon and nor legs on mobo

how can i update the flasher when I can't get any power into it. I'll try cleanin my mobo and cable with some isopropynol

[ortis123]

Originally Posted by donkey-punch how can i update the flasher when I can't get any power into it. I'll try cleanin my mobo and cable with some isopropynol

you get no green light too?? it means your ribbon or e3 flasher is dead. try hitting the button on top of the e3flasher or reset

[donkey-punch]

cleaned mobo and cable still no power whatsoever to my e3 flasher. tried reset button and button on top still no joy.

[ortis123]

Originally Posted by donkey-punch cleaned mobo and cable still no power whatsoever to my e3 flasher. tried reset button and button on top still no joy.

i dont know man. i had 3 spare e3flasher at the begining (only one fuctionall at the moment). you cant expect too much for a china product.

[baileyscream]

@donkey-punch
@ortis123

the flasher works fine.

i downgraded with it using the linker and the clip.

if it wouldnt downgrade then i wouldnt have sold you it.

if there is no power then
the clip is either on the wrong way around or
the legs of the nor are dirty (this then can be passed onto the clip pins) or
the clip isnt sat on the nor correctly or
the connector on the E3 is loose (you may need to clamp this if the ribbon is tight)

you also dont need the internals of the ps3 sat into the base of the ps3's casing (if you have it like this) then you will get a bit more room to alter things.

you dont need the E3 sat in the hdd bay either (if you have it like this) so again you can put the E3 in a better position to give you more space.