[butnut]

Originally Posted by Ray305 For Christmas, I will be purchasing the E3 Flasher limited edition found on Modchip central. I know that to completely downgrade my system I require the flasher and the E3 card reader. I was just wondering, does the screwdriver that comes with the flasher work for every bolt that I have to unscrew or will I need another screwdriver?

Like everyone else said the needed torx is included, but if you don't receive it for some reason you can use a very small flathead screwdriver to remove the torx screws.

Thats what I do because I did not buy the limited version.

[Ray305]

Originally Posted by vb_encryption_vb I'd be careful with that damn esata station, mine blew a capacitor during a downgrade and shorted out the SD card reader. Docking station isn't necessary any how. I found it useful for all the hard drives I had laying around.

What do you mean the station isn't necessary?

[bigwong]

I can confirm that the Torx Screw Driver and a non magnetized Phillips head Screw Driver come with the Limited Edition.

[vb_encryption_vb]

Originally Posted by Ray305 What do you mean the station isn't necessary?

There is no need for the station. No need for the HD to be hooked up. Just wait for the console to say cannot boot or something along them lines. Then start the downgrade process. The only reason I had it hooked up this time was to see if it would make the process any faster for whatever reason. Blew up instead. No need for that crap.

[Ray305]

Originally Posted by vb_encryption_vb I'd be careful with that damn esata station, mine blew a capacitor during a downgrade and shorted out the SD card reader. Docking station isn't necessary any how. I found it useful for all the hard drives I had laying around.

Maybe you were using a faulty converter or something.

Sent from my LG-MS770 using Tapatalk 2

[vb_encryption_vb]

Originally Posted by Ray305 Maybe you were using a faulty converter or something. Sent from my LG-MS770 using Tapatalk 2

Not worried about it. It didn't fry the HD or the ps3. Just took out my e3, which a new once arrived today No need for the sata station.

[madman158]

My esata station works fine. Just go to radioshackbring bring the plug with you . Its like $9.00 for one. Remember a power adapter not converter. The esata station is aready set up for all the different types of power all you need is a adapter.

[Ray305]

Do you guys know if there is a very detailed step-by-step guide that shows you how to disassemble and reassemble the PS3 to install the E3 Flasher?

[itskamel]

Originally Posted by Ray305 Do you guys know if there is a very detailed step-by-step guide that shows you how to disassemble and reassemble the PS3 to install the E3 Flasher?

search on youtube the video i watched was 3 parts and very helpful. are you doing a slim?

[Ray305]

Yeah, the very first 120GB slim.