[specialmio]

Hello everyone, I am writing to ask you all a help to solve this problem... I have recently only for the downgrade of the problems with the ps3 40gb with samsung nand k9f1g08UOB flow rebuilder... gives me error and not I can go on... i have try to use Wellon programmer vp-990 and I never had problems.

i have try with 3 different ps3 40gb .....

If I try the same as going to apply the patch, it's okay but then once welded the two nand the console tab does not start and gives ylod ... and if I write again dump original and solder on the board the console starts normally .

sorry for my english, I attach here the two nand dump:

http://www.consolle-mania.com/images...0gb%20nand.rar

[Sarah1331]

You need to remap your badblocks


Sent from my iPhone 5 using Tapatalk

[3absiso]

Originally Posted by Sarah1331 You need to remap your badblocks Sent from my iPhone 5 using Tapatalk

I know that J-runner will do it for you in the xbox360, (Off coarse in some cases you have to do it manually)
but how can we do it for the PS3?

[Sarah1331]

Originally Posted by 3absiso I know that J-runner will do it for you in the xbox360, (Off coarse in some cases you have to do it manually) but how can we do it for the PS3?

Good old j-runner I remember before j-runner I made my own app to do it all j-runner just looks good lol

It's same to remap the blocks but its finding the bad blocks that's the hard long time consuming part


Op by any chance is it a CECHG ??


Sent from my iPhone 5 using Tapatalk

[guerrierodipace]

Originally Posted by specialmio Hello everyone, I am writing to ask you all a help to solve this problem... I have recently only for the downgrade of the problems with the ps3 40gb with samsung nand k9f1g08UOB flow rebuilder... gives me error and not I can go on... i have try to use Wellon programmer vp-990 and I never had problems. i have try with 3 different ps3 40gb ..... If I try the same as going to apply the patch, it's okay but then once welded the two nand the console tab does not start and gives ylod ... and if I write again dump original and solder on the board the console starts normally . sorry for my english, I attach here the two nand dump: http://www.consolle-mania.com/images...0gb%20nand.rar

buona fortuna Specialmio
good luck

[baileyscream]

Originally Posted by Sarah1331 Good old j-runner I remember before j-runner I made my own app to do it all j-runner just looks good lol It's same to remap the blocks but its finding the bad blocks that's the hard long time consuming part Op by any chance is it a CECHG ?? Sent from my iPhone 5 using Tapatalk

is there no tool available that can find and re-map for you?

perhaps you could do a tut that might help ppl do this or do you have any links to info about re-mapping and how to do it?

btw your second link in your sig is not working
************* [ - Post Merged - ] *************

Originally Posted by specialmio snip

remove the link to your dump
its not safe posting it in an open forum

[specialmio]

i'm not a expert of this problem .....but i know that not there is software for re-map bad block in ps3 ....there is for xbox360 but not i s the same .....strange , i have the same problem with 3 different ps3 40gb ....i have problem only with 40gb ps3 ....not have problem with 60gb and with NOR ......i have try with new flow rebuilder 4.2.3.0 but is the same......the problem is to interleave and unscramble 2 nand in 1 nand .....

[Sarah1331]

Originally Posted by specialmio i'm not a expert of this problem .....but i know that not there is software for re-map bad block in ps3 ....there is for xbox360 but not i s the same .....strange , i have the same problem with 3 different ps3 40gb ....i have problem only with 40gb ps3 ....not have problem with 60gb and with NOR ......i have try with new flow rebuilder 4.2.3.0 but is the same......the problem is to interleave and unscramble 2 nand in 1 nand .....

It's hard to explane but the interleaved is ok your errors are the data extracting

You need to join the two then remap the bad blocks unfortunately they don't go to the end (3fff) and in reverse order like Xbox
Then you need to replace the tsop or remap but I seem to find remapping to there designated badblock area fails ???
I can only succeed on placing bad blocks in there orig position and replacing tsop's

How many bad blocks do you have??
In top or bottom ??
Is console cechg ??
Are your nands a or b's


Sent from my iPhone 5 using Tapatalk

[guerrierodipace]

from another forum:

You are welcome. I already contacted him and talked to him about this problem. He told me that this problem always happened in this board version SEM-001 since Samsung U0B NAND chips are very bad and always have a bad blocks. The best solution for that is to find a spare Samsung U0A NAND chips from old COK-001 or COK-002 board or if you can order it in new condition. So after that just flash your dump into this chips and replace the bad one in the board but that will need a good soldering skills or maybe someone could help you doing this.

[Sarah1331]

Originally Posted by guerrierodipace from another forum:

Half the problem yes dump NAND with bad blocks
Replace tsop's and flash back the bad block locations are still empty and the data remapped to a safe location

Your in exact same sticky sh*t you started you need to remap the badblock

Ps updating wont fix it either as syscon still believes there's bad blocks at xx address


Sent from my iPhone 5 using Tapatalk