[mordax]

this is so BAD tutorial, not even a tutorial, its more like .. take usb .. BLAH BLAH some more blah blah blah ... load and you're done. WHAT THE ****?

sorry for my frustration, but ...

1. HOW do i load SWAPMAGIC ????? there are no instructions whatsoever. so i copied the SWAPMAGIC on my usb flash drive (FAT32 1gb) i plug it into port 1, THEN WHAT?? it doesn't magically boot up, so where do i go? how do i boot up SWAPMAGIC? what do i press? where? how? when?

2. how do i know what version is my ps3? jap or usa or eur? i dont know how to find out, so i don't know what to rename the files to. nothing is happening.

[GregoryRasputin]

Originally Posted by mordax this is so BAD tutorial, not even a tutorial, its more like .. take usb .. BLAH BLAH some more blah blah blah ... load and you're done. WHAT THE ****? sorry for my frustration, but ... 1. HOW do i load SWAPMAGIC ????? there are no instructions whatsoever. so i copied the SWAPMAGIC on my usb flash drive (FAT32 1gb) i plug it into port 1, THEN WHAT?? it doesn't magically boot up, so where do i go? how do i boot up SWAPMAGIC? what do i press? where? how? when? 2. how do i know what version is my ps3? jap or usa or eur? i dont know how to find out, so i don't know what to rename the files to. nothing is happening.

Not sure if you are an extreme masturbator and have gone blind, but this tutorial, the one that is on the OP, is no where near bad, try using your brain and not your ass....

Originally Posted by Pirate This is a tutorial on how to boot Playstation 2 ISO's on the PS3 via external HDD. The original founder of this method was ifcaro, this tutorial is a step-by-step method on how to get PS2 ISO's to run on your PS3. Original thread can be viewed here. PS3Hax takes no responsibility of damage caused to your PS3 through this method, and all information here is for informational/educational purposes only. How to play PS2 ISO's on PS3 via USBAdvance (aka USBLD) PS2 backups playing on PS3 via HDD - YouTube (Video by idone) What you need: Swap Magic 3.6+/3.8(Purchase here or here) (Must be actual copy, burned copies do NOT work). Launch PS3 (20/60gb) - NTSC/Japanese (Must have emotion engine, only launch PS3's had this). Flash Drive (PSP in USB MODE will also work). Here is the EASY and suggested method: Click here to see full text Here is the SUPER EASY method to run USB Loader. 1. Create a folder on a compatible USB Device (ie: PSP) called SWAPMAGIC. 2. Place the USBLD_0.2b.elf file (DOWNLOAD HERE: http://www.haxnetwork.net/downloads.php?do=file&id=247) in this folder and rename it SMBOOT0.elf 3. If you are using the same drive to boot the game from place it in the root of the drive. 4. Load Swap Magic with the USB Device in the FIRST USB port. 5. Press UP and L1 and USB Loader should boot. 6. Press X for a PAL console or O for a NTSC console 7. Wait for USB Loader to boot and select your game. Long, Old method, use if you have issues with easy one. Click here to see full text If you are a Japenesee PS3 user you need to rename the folder BADATA-SYSTEM to BIDATA-SYSTEM -This guide will assume you are a USA user and call the folder "BADATA-SYSTEM" in the download pack. Download the USBAdvance Tutorial File Pack. Extract the contents of the folder USBADVANCE to the root of your flash drive/PSP. Boot up SWAPMAGIC and once loaded into the menu screen, people who are using swapmagic v3.6 press UP (on D-Pad)+L2 on your PS3 controller to browse through your flash drive. People that are using Swapmagic v3.8 go to the SMBOOT menu and select uLaunch from there. In the pack provided uLaunch is SMBOOT1. Go to configure, select any button you want (I usually use X or O), go to MISC and select FILEBROWSER binding it to the selected button, go down and hit ok. Now go to the browser. (Props to Crono for telling us how to use v3.8 Swapmagic). If you are unable to view your flash drive, then it is not compatible (use another one). Copy the BADATA-SYSTEM folder and USBLD_01.ELF file to your Virtual Memory Card (on PS3). Go inside BADATA-SYSTEM folder and cut/move the Pictures and SWAPMAGIC folder to ROOT the Virtual Memory Card. Remove your FLASH DRIVE, press the button and quit the game and go back to XMB and launch swap magic. At this point you should move the Playstation 2 ISO's of your choice to your external HDD/flash drive. You need to have them properly formmated and copied over via USBExtreme or USBUtil (is included in file you downloaded above). If you are not sure how to do this, there is a quick tutorial that guides you through the process. Make sure your USB/Flash drive is plugged into your PS3. Once booted, browse and launch USBLD_01.ELF And there you have it, if you followed this tutorial properly you should see the Playstation 2 ISO's there and just click and launch How to copy PS2 ISO's to a external USB/flash drive Method 1 Download the USBAdvance Tutorial File Pack. (Ignore if you downloaded it in last tutorial), and extract the folder USB EXtreme to you desktop. Plug in your USB HDD (or Flash drive) Put a PS2 game into your disc drive (if the game is already on your computer you can mount it with Alcohol 120) Open up the USB EXTREME tool on your compute. Select your Disc Drive the PS2 game is in, Media type (most are DVD's) and your USB/Flash drive. Now you can name the game and hit start. There you have it a properly copied game to your HDD, just pop it in your PS3 and follow step 8 from above. Method 2 (Easier Method) Download USButil located here. Format your external drive/usb drive to FAT/FAT16/FAT32 format. In the download pack you downloaded there should be a folder called USBUtil, go inside that and run the EXE. Go to FILE and click on "OPEN ISO to create game". Search and click on your PS2 backup, and click CREATE. The program will now copy the ISO over to your pendrive (it takes some time). F.A.Q Q: Does this work on my 80gb PAL/NTSC/JAP System? A: This will work with any 80GB PS3 before and including the MGS bundle,this method will not work on Pal 80GB consoles. Q: Does this work on my 40gb PAL/NTSC/JAP System? And will it ever? A: No. No. No. No. No. No method has been released yet for these systems and unsure when in future. Q: Does this work on PAL PS3's? A: Yes read: http://www.ps3hax.net/showthread.php?t=8861 Q: How do I know if my unit is a LAUNCH UNIT? A: Check model number on back of PS3, if it is a launch unit it will be one of the follow: CECHA, CECHB, CECHC, CECHD Q: Does this work on NTSC PS3's? A: Yes Q: What PS3's can use this method of PS3's? A: Basically USA and Japenese Launch Consoles (20/60gb) that contain the Emotion Engine (PS3 Models CECHA, CECHB, CECHC, CECHD),also 80GB models including the MGS4 bundle and before. Q: Will it work on a PS3 with no Emotion Engine? A: Yes it will work with those that use software Emulation. Q: Does this boot from PS3 internal HDD? A: No you need a external. Q: What version of SWAP MAGIC do I need? A: 3.6+ or 3.8 Q: Where can I buy Swap Magic? A: Here and here. Q: Swap Magic cant see my USB for somereason A: It is probably not compatible, buy another one.

[mordax]

i read that, i said i done that. i plug usb stick into ps3 and nothing happens.

[GregoryRasputin]

Originally Posted by mordax i read that, i said i done that. i plug usb stick into ps3 and nothing happens.

Where did you by Swap Magic ?

[carldenning]

Originally Posted by GregoryRasputin Where did you by Swap Magic ?

i bet he downloaded Swap Magic and extracted the iso to usb

[GregoryRasputin]

Originally Posted by carldenning i bet he downloaded Swap Magic and extracted the iso to usb

lol that was my first thought, but i thought id give him the benefit of the doubt.

[FreakAlchemist]

Originally Posted by carldenning i bet he downloaded Swap Magic and extracted the iso to usb

It sure is looking that way.

[mordax]

yes i downloaded the linked content, where it says download.
i followed the easy guide.

these instructiosn are confusing, if i still need to buy it, then why do i need to download it??
im not some geek i just want to play ps2 games on my jailbroken ps3, thats all.
if its obvious to you to use some bootloader or bought iso, then it isnt for simple people who have never done this before.

[GregoryRasputin]

Originally Posted by mordax yes i downloaded the linked content, where it says download. i followed the easy guide. these instructiosn are confusing, if i still need to buy it, then why do i need to download it?? im not some geek i just want to play ps2 games on my jailbroken ps3, thats all. if its obvious to you to use some bootloader or bought iso, then it isnt for simple people who have never done this before.

WHERE DID YOU BUY THE SWAP MAGIC DISC

[tjhooker73]

Originally Posted by mordax yes i downloaded the linked content, where it says download. i followed the easy guide. these instructiosn are confusing, if i still need to buy it, then why do i need to download it?? im not some geek i just want to play ps2 games on my jailbroken ps3, thats all. if its obvious to you to use some bootloader or bought iso, then it isnt for simple people who have never done this before.

What you need: Swap Magic 3.6+/3.8(Purchase here or here) (Must be actual copy, burned copies do NOT work). Launch PS3 (20/60gb) - NTSC/Japanese (Must have emotion engine, only launch PS3's had this). Flash Drive (PSP in USB MODE will also work).

He must not have a launch phat.
The only other way is COBRA USB or OpenCobra