[PS3HAX_UK]

Does anyone got an diagram for potentiometer for ps3 phat.. much appreciate it....


thanks

[Mr.Dutch]

Originally Posted by PS3HAX_UK Does anyone got an diagram for potentiometer for ps3 phat.. much appreciate it.... thanks

are you talking about a fan mod?

[PS3HAX_UK]

Originally Posted by Mr.Dutch are you talking about a fan mod?

Yes Pal.. cheers

[Mr.Dutch]

@PS3HAX_UK



for the first two schematics credits go to @KillerBug , i only drawed it out one day for him (on afterdawn)

the third one i created myself, my mod extends the pwm pulses from the ps3 while 1 and 2 are working standalone)

you probably have to focus on diagram 2/.

a quote from killerbug (for schematic 1 or 2)

R1 and R2 are both 10K. The 7805 is a L4931CZ33-AP for slim units or a L4931CZ50-AP for fat units. It only needs to be a 7805 if you are using a low resistance pot (and the only reason to do this is if you really like the appearance of some pot you happen to have or something). 100nF = 0.1uF; not really a correction, just a tip for those having trouble finding 100nF caps. For the completely internal design, the 100K single-turn mountable POT is replaced with a 100K 12-Turn trimmer POT. R1 and R2 are both removed; The R1 side of P1 connects directly to Pin 8 of the TLC555, and the R2 side of P1 connects to pin 2 of the TLC555.

[Firebuble]

sorry, i read it wrong :P