[dubeyduck]

hi so i downgraded me ps3 with an e3 flasher. all went fine till the de-hashing bit at 1st the ps3 would not recognize the pup then when it did it started to install it went to 100% then me ps3 turned off now when i try to turn it on it stays on for about 5 secs then turns off a with blinking red light is this a brick or a ylod

thanks for looking

[Mr.Dutch]

Originally Posted by dubeyduck l it went to 100% then me ps3 turned off now when i try to turn it on it stays on for about 5 secs then turns off a with blinking red light is this a brick or a ylod

ylod as in hardware faillure? , i would say brick.

did you tried to take out the hdd, or go into recovery? , or will it shutt off no matter what you do.

[dubeyduck]

Originally Posted by Mr.Dutch ylod as in hardware faillure? , i would say brick. did you tried to take out the hdd, or go into recovery? , or will it shutt off no matter what you do.

yeah no matter wot i do it shuts down thanks for the reply

[Mr.Dutch]

Originally Posted by dubeyduck yeah no matter wot i do it shuts down thanks for the reply

i'm guessing you have a dump that you can flash again?
and from what i know if the tristate is soldered to ground the ps3 should stay on right?, unless it''s a hardware issue.

[donkey-punch]

Originally Posted by Mr.Dutch i'm guessing you have a dump that you can flash again? and from what i know if the tristate is soldered to ground the ps3 should stay on right?, unless it''s a hardware issue.

some users have confirmed taping a wire from sbe to tristate. I haven't ever needed to try (yet). It is always better to solder, but if he don't have a soldering iron could always try taping wire to sbe on e3 ribbon cable to tristate on ps3 mobo

[baileyscream]

why why why are you opening thread after thread when i am helping you in the fool proof guide?
************* [ - Post Merged - ] *************

Originally Posted by Mr.Dutch i'm guessing you have a dump that you can flash again? and from what i know if the tristate is soldered to ground the ps3 should stay on right?, unless it''s a hardware issue.

its a de-hash fail
he just needs to flash the patch back
(if he had progskeet or Teensy++ then you re-dump, verify , re-patch , re-flash if you dont have the origional dump)

did you have a good hol btw mr dutch?

[donkey-punch]

Originally Posted by baileyscream why why why are you opening thread after thread when i am helping you in the fool proof guide? ************* [ - Post Merged - ] ************* its a de-hash fail he just needs to flash the patch back (if he had progskeet or Teensy++ then you re-dump, verify , re-patch , re-flash if you dont have the origional dump) did you have a good hol btw mr dutch?

I'm putting it down to impatience mate, they must think you have nothing better to do with your time other than help out here. I don't think 24 hours is a long wait before people respond but many others must get impatient and panic.

[Mr.Dutch]

Originally Posted by baileyscream did you have a good hol btw mr dutch?

i had a good hol, until @mrc1978 started raping me...lol

just a dutch joke, 'hol' in dutch means the same as ass

but i guess you meant holliday? , if so then yes, still free from work this week.

[dubeyduck]

Originally Posted by baileyscream why why why are you opening thread after thread when i am helping you in the fool proof guide? ************* [ - Post Merged - ] ************* its a de-hash fail he just needs to flash the patch back (if he had progskeet or Teensy++ then you re-dump, verify , re-patch , re-flash if you dont have the origional dump) did you have a good hol btw mr dutch?

sorry mate i didn't want to keep bugging you since you wir on till late last night tying to help me so do i need to flash my original dump back on the ps3
************* [ - Post Merged - ] *************

Originally Posted by donkey-punch I'm putting it down to impatience mate, they must think you have nothing better to do with your time other than help out here. I don't think 24 hours is a long wait before people respond but many others must get impatient and panic.

i would of asked him but i didn't want to bug him he spent a bit of time helping me last night like i sed i didn't want to piss him off keep asking because it was good of him to help me in the 1st place

[baileyscream]

Originally Posted by dubeyduck sorry mate i didn't want to keep bugging you since you wir on till late last night tying to help me so do i need to flash my original dump back on the ps3

i have put the steps you need to do in the guide thread
but by staying in the guide others who know can read back and see what has happened and then have a better idea of the problem

but anyway it just needs the tristate soldering to gnd point or to sbc on the clip (then have flash fun up) to halt the ps3 (it wont red light and turn off) then with your dump and the patch file on the micro sd card you do the installing patch file step again.
then unsolder the tristate or put flash fun switch back down

then follow the reast of the guide.