[Mr.Dutch]

Originally Posted by baileyscream i carnt not with so little info anyway. and that attitude..... well that needs putting away and quick or you will just get ignored

i suddenly feel glad that i'm not in your shoes..... that you still come back.

[baileyscream]

Originally Posted by Mr.Dutch i suddenly feel glad that i'm not in your shoes..... that you still come back.

lol i have my shreak slippers on
there nice and cosy

but my steal toe caps are close by

[dubeyduck]

Originally Posted by baileyscream lol i have my shreak slippers on there nice and cosy but my steal toe caps are close by

do you no where i need to solder on the ps3 on a cech 2003a bored

[baileyscream]

Originally Posted by dubeyduck do you no where i need to solder on the ps3 on a cech 2003a bored

look on the board its self
there will be a board number
DIA-001
VER-001
JSD-001
DYN-001

go to the E3 guide
under Setting Up The E3 Flasher click the Soldering the E3 Flasher

click the right image to get a bigger pic or right click the image and save it to your pc so you can zoom in

you need the sbe point

[elmedir]

Bailey,
Thank you for this very helpful guide. I am having an issue though, that im hoping you can give me some guidance. Using this guide I was able to successfully downgrade my CECH-2501A to CFW rogero 3.55. I booted into the xmb with no problems and was even able to install some packages. At this point though, I accidentally unplugged the ps3 while moving it and now when I boot up I'm not getting any video. The data light comes on briefly but then nothing else. The system doesn't shut down or really do anything. Am I bricked at this point? I do have three original dumps that I verified using your guide.

I am using the E3 Linker and have checked all of my solder points. Thanks again for this guide and all the hard work all of you guys put into this forum.

[magic_marty]

Originally Posted by Sarah1331 Look for a 2000 then buddy progskeet is the way for NAND consoles Sent from my iPhone 5 using Tapatalk

Will the E3 flasher work with the nand consoles if it is soldered ?
if so i might give it a go beings i have some experience soldering..

[Sarah1331]

Originally Posted by magic_marty Will the E3 flasher work with the nand consoles if it is soldered ? if so i might give it a go beings i have some experience soldering..

No ...


Sent from my iPhone 5 using Tapatalk

[Dartban214]

Hey bailey I just thought I'd give you a heads up. On the slim strip down you are almost correct. LOL I didn't take it completely apart but there are 4 torx screws not 3

[magic_marty]

Originally Posted by Sarah1331 No ... Sent from my iPhone 5 using Tapatalk

so if i use the progseek i know up front i have to solder it to the board or use the clips ..with the progseek 1.2 do i need the injectus jtag? i read somewhere the 1.2 does not require it.
i guess im just not 100% sure what i need if i decide to use progseek cause of there beinf different versions available..with the E3 it comes as a kit with nothing else to buy separately...

[Sarah1331]

Read the very beginning of the guide buddy I have a adaptor board for sale there too


Sent from my iPhone 5 using Tapatalk