[MoREL]

well , i installed my e3 flasher correctly and run my ps3

then i was goin to update my e3 flasher but nothing happened (no 8 blue light)

so i tried a few times but nothing new

then i reopen the ps3 to check the linker and it was fine

when i closed the ps3 and run it it just run for a few sec 2-5 3 beeps then turn off without any lights

what should i do to solve this


edit :

ps3 slim model : cech 2503 b 320 gb date code : 1a board : jsd-001

i mod the fan after the brick

i tried b4 15 min to run the ps3 and it didnt start

here's the pics











after soldering the connector










i didnt face any prob b4 this 1

my prob with downgrading was the e3 flasher didnt read the update (no 8 blue led lights)

any solve for this porb

[Mr.Dutch]

Originally Posted by MoREL when i closed the ps3 and run it it just run for a few sec 2-5 3 beeps then turn off without any lights

this is not my territory because an e3flasher is involved, but from what i know it sounds like a corrupt bios or flash.

if you probably press the power button again the standby led will come on again?

maybe @baileyscream can help, he has nothing to do anyway.

[donkey-punch]

Originally Posted by MoREL well , i installed my e3 flasher correctly and run my ps3 then i was goin to update my e3 flasher but nothing happened (no 8 blue light) so i tried a few times but nothing new then i reopen the ps3 to check the linker and it was fine when i closed the ps3 and run it it just run for a few sec 2-5 3 beeps then turn off without any lights what should i do to solve this

Have you plugged the fans back in? Also are you using linker or clip?

[DEFAULTDNB]

/me wonders whether to change the title to:

"Help I have bricked my ps3 with an e3 flasher.. help me plz !!!

@playerkp420 or @baileyscream or @hellsing9 will know how to help

[MoREL]

Originally Posted by Mr.Dutch if you probably press the power button again the standby led will come on again?

yup . when i press the power bytton standby led will come on
************* [ - Post Merged - ] *************

Originally Posted by donkey-punch Have you plugged the fans back in? Also are you using linker or clip?

yes i plugged the fan , i'm using a clip

[Mr.Dutch]

Originally Posted by MoREL yes i plugged the fan , i'm using a clip

the ps3 acts the same if you remove it?

P.S
i never ever done something like this, so i don't know if it's easy to remove it.

[donkey-punch]

Originally Posted by MoREL yup . when i press the power bytton standby led will come on ************* [ - Post Merged - ] ************* yes i plugged the fan , i'm using a clip

You don't need to put all the bits back together unless of course you are going to dual boot. Try removing the clip like @Mr.Dutch suggets and see if the ps3 will boot without it.

[MoREL]

Originally Posted by Mr.Dutch the ps3 acts the same if you remove it? P.S i never ever done something like this, so i don't know if it's easy to remove it.

yeah , btw i solder the fan's connector by a pro modder

i dont know if this is the prop but i did it after i install the e3 flashe and remove it
************* [ - Post Merged - ] *************

Originally Posted by donkey-punch You don't need to put all the bits back together unless of course you are going to dual boot. Try removing the clip like @Mr.Dutch suggets and see if the ps3 will boot without it.

i did but nothing new

[Mr.Dutch]

Originally Posted by MoREL yeah , btw i solder the fan's connector by a pro modder i dont know if this is the prop but i did it after i install the e3 flashe and remove it

any short on the fan would give a normal YLOD.... and if it is trying to spin it's ok.

in my opinion you have to wait until the experts on this forum wake up.

[MoREL]

Originally Posted by Mr.Dutch any short on the fan would give a normal YLOD.... and if it is trying to spin it's ok. in my opinion you have to wait until the experts on this forum wake up.

its spin but slowly , i dont think this is the prob cuz it start b4 soldering the connector

thanks