[Mr.Dutch]

Originally Posted by MoREL its not dameged i dont have 1 but i'll buy it but where the psu output

did you unplugged the ps3 for a little while and replug it to see if the stadby led comes on again?

also, check if the 4 wire connector from the psu is seated properly.
the pinout should be:
1. Switch_on
2. Ground
3. Ground
4. +5V <-----

[donkey-punch]

Originally Posted by MoREL its not dameged i dont have 1 but i'll buy it but where the psu output

The cable may not appear damaged but have you checked the ends of the cable (the contacts) they need to be shiny with no worn dirty marks on.

[playerkp420]

@MoREL

If you have no red standby light, it is most likely the cable to the PSU.

Maybe you have broke the plug to the mobo for it. Like you did on the fan.

The e3 flasher did not cause this problem. The person installing the flasher caused the problem.

If you have not even updated the flasher and make any dumps, then you didn't do any flashing yet. So, the problem is definitely a hardware issue.
You can solder a wire from the nor tristate to ground, to confirm that is hardware related. If the console stays on with that wire soldered, then it is from the flash.
But I think that will be a waste of time.
My guess is you broke the plug for the white psu cable. I have a cech-2501b, with the same problem. At first the plug did not look that bad, then it got worse as I messed with it.

Please change the title of the thread. E3 flasher has nothing to do with your problem. Except for you failed at installing it without breaking your PS3.

[baileyscream]

Originally Posted by Mr.Dutch this is not my territory because an e3flasher is involved, but from what i know it sounds like a corrupt bios or flash. if you probably press the power button again the standby led will come on again? maybe @baileyscream can help, he has nothing to do anyway.

i just noticed this!!!!
cheeky SOD (Son Of a Dog)

btw has nobody mentioned how Mr.Dutch loves hardware faults and none english speaking threads?
no!!
funny that


@MoREL
you might not like what your hearing right now but it is down to user error.
and now the ps3 is getting worse.

your ps3 is now dead?
no light nothing.
try your mains lead in something else like a stereo to see if thats working and vice versa (the wall plug cable to ps3)

once you comfirm thats working follow players advice. dont skip anything he tells you to do and dont add anything he hasnt told you to do.

now to see what else @Mr.Dutch has got me into

[Mr.Dutch]

Originally Posted by baileyscream try your mains lead in something else like a stereo to see if thats working

add that he should turn the volume up to max, to fully test the cable

[MoREL]

Originally Posted by playerkp420 @MoREL If you have no red standby light, it is most likely the cable to the PSU. Maybe you have broke the plug to the mobo for it. Like you did on the fan. The e3 flasher did not cause this problem. The person installing the flasher caused the problem. If you have not even updated the flasher and make any dumps, then you didn't do any flashing yet. So, the problem is definitely a hardware issue. You can solder a wire from the nor tristate to ground, to confirm that is hardware related. If the console stays on with that wire soldered, then it is from the flash. But I think that will be a waste of time. My guess is you broke the plug for the white psu cable. I have a cech-2501b, with the same problem. At first the plug did not look that bad, then it got worse as I messed with it. Please change the title of the thread. E3 flasher has nothing to do with your problem. Except for you failed at installing it without breaking your PS3.

i think u r right , i bought multimeter and checked it

its good ... multimeter shows 989 is that enough ??

plus when i plug the wall cable to the ps3 the fan started to spin for like 4 sec then stopped
************* [ - Post Merged - ] *************

Originally Posted by baileyscream i just noticed this!!!! cheeky SOD (Son Of a Dog) btw has nobody mentioned how Mr.Dutch loves hardware faults and none english speaking threads? no!! funny that @MoREL you might not like what your hearing right now but it is down to user error. and now the ps3 is getting worse. your ps3 is now dead? no light nothing. try your mains lead in something else like a stereo to see if thats working and vice versa (the wall plug cable to ps3) once you comfirm thats working follow players advice. dont skip anything he tells you to do and dont add anything he hasnt told you to do. now to see what else @Mr.Dutch has got me into

my ps3 not dead yet
************* [ - Post Merged - ] *************

Originally Posted by Mr.Dutch add that he should turn the volume up to max, to fully test the cable

its a hardware ... the ball in ur field

[Mr.Dutch]

Originally Posted by MoREL its good ... multimeter shows 989 is that enough ??

what are you trying to measure.

[MoREL]

Originally Posted by Mr.Dutch what are you trying to measure.

what the mother board takes from the power supply

[Mr.Dutch]

Originally Posted by MoREL what the mother board takes from the power supply

are you trying to measure volts?, it's an unusual number you are posting.

[MoREL]

Originally Posted by Mr.Dutch are you trying to measure volts?, it's an unusual number you are posting.

not the volts ... the continuity