[underwurlde]

History:
NAND PS3: used ProgSkeet read NAND, patch, verify, and re-programmed to get PS3 successfully on to Rogero.

Problem though: BlueRay DVD is not original, hence needs remarrying via downgrade & remarry process etc.

So, successfully downgraded to 3.55 OFW.

Then installed Rebug QA_Toggle package to de-hash. Package installed OK and appears under Games XMB.

Now the problem: Running QA_Toggle, screen goes black (good) and then NOTHING. No beeb, no return to XMB. Tried this many times.

Any advice will of course be much appreciated!

Andy

[Mr.Dutch]

Originally Posted by underwurlde Now the problem: Running QA_Toggle, screen goes black (good) and then NOTHING. No beeb, no return to XMB. Tried this many times.

so basically your ps3 looks bricked? , you know i did read a thread like this before, i think the advice was to reflash the ps3 again, but i'm not sure.

i thought some mentioned multiman can also remarry drives now?

[donkey-punch]

Try pulling the plug from the back power back on and try again. I normally have to give it a couple of goes after downgrade before I get the 3 beeps and returned to xmb.

[3absiso]

Originally Posted by underwurlde History: NAND PS3: used ProgSkeet read NAND, patch, verify, and re-programmed to get PS3 successfully on to Rogero. Problem though: BlueRay DVD is not original, hence needs remarrying via downgrade & remarry process etc. So, successfully downgraded to 3.55 OFW. Then installed Rebug QA_Toggle package to de-hash. Package installed OK and appears under Games XMB. Now the problem: Running QA_Toggle, screen goes black (good) and then NOTHING. No beeb, no return to XMB. Tried this many times. Any advice will of course be much appreciated! Andy

This happens to me once;
in the QA there are two packeges QA flag and reset QA.
run Reset QA first and after that run QA it should work for you. it did it for me

[haz367]

the black screen is because the BD drive isn't married? = no PKG can run, i can remember that Mushy with NANDS always used 2xFSM install to DEHASH the system and it always worked fine, then after succesfull dehash do the final remarry on 355, the MM fix is just for "broken" playback..restores/creates new valid DLR files or something?! not full remarry

[underwurlde]

Originally Posted by Mr.Dutch so basically your ps3 looks bricked?...

PS3 not bricked. If mains power switched off/on, PS3 powers up OK into v3.55.

Originally Posted by 3absiso This happens to me once; in the QA there are two packeges QA flag and reset QA. run Reset QA first and after that run QA it should work for you. it did it for me

Really? I don't see two packages? Just the one. Unless I'm being stupid (think N00b). Where did you source your QA_Toggle package from. Perhaps mine is an older version?

Cheers,

Andy

[donkey-punch]

Originally Posted by underwurlde PS3 not bricked. If mains power switched off/on, PS3 powers up OK into v3.55. Really? I don't see two packages? Just the one. Unless I'm being stupid (think N00b). Where did you source your QA_Toggle package from. Perhaps mine is an older version? Cheers, Andy

https://www.dropbox.com/sh/z3uawrog4c2o905/Klg-MMYJm2 try that

[3absiso]

Originally Posted by underwurlde PS3 not bricked. If mains power switched off/on, PS3 powers up OK into v3.55. Really? I don't see two packages? Just the one. Unless I'm being stupid (think N00b). Where did you source your QA_Toggle package from. Perhaps mine is an older version? Cheers, Andy

There is "reset_Qa_flag.pkg"
i have it at home. google for it you will find it

Edit:
@donkey-punch put it for you

[underwurlde]

Originally Posted by haz367 the black screen is because the BD drive isn't married? = no PKG can run, i can remember that Mushy with NANDS always used 2xFSM install to DEHASH the system and it always worked fine, then after successful dehash do the final remarry on 355, the MM fix is just for "broken" playback..restores/creates new valid DLR files or something?! not full remarry

REALLY. I'm doing steps suggested TO REMARRY and part of that step won't work because BD isn't married??? F-me.

Originally Posted by haz367 ... Mushy with NANDS always used 2xFSM install to DEHASH the system ...

I won't pretend to fully understand (yet) what you've written there btw.

Cheers,

Andy

[Mr.Dutch]

@underwurlde , do you have a dongle to get into fsm?, then you can remarry the drive.

lol, confused, you don't need to dehash to get into fsm right? or am i wrong....