[donkey-punch]

Originally Posted by nick64 The cable is plugged but this white thing that is in motherboard has been broken... Post to this guide ?

No don't post to this post. You need to post in the guide you are following. Also you have buggered the fan plug, you might want to start looking at guides to fix that or an alternative power supply for the fan. But that is where your problem lies. Can you solder?

[playerkp420]

Might as well keep this thread going for help. The problem is not with following the guide. But with a busted fan plug.
You will need to get it soldered back.

Same problem here. See pics of after it was fixed here.

[nick64]

well I can't solder but my father can and very well. I will ask his help. So if he solder it is it going to be alright and i will just follow the instructions?
I will ask his help after returning from work and i will post here if i have the same problme.

[donkey-punch]

Originally Posted by nick64 well I can't solder but my father can and very well. I will ask his help. So if he solder it is it going to be alright and i will just follow the instructions? I will ask his help after returning from work and i will post here if i have the same problme.

yep get the fan plug fixed and carry on with the guide.

[nick64]

also i want to ask somethin more. I saw this video http://www.youtube.com/watch?feature...&v=WHNw2E4tU6c (to see the steps after the e3 flasher part) and at this time in video it shows the lights 10:14. My lights from e3 flasher is exactly the same except the blue ones. They aren't so bright. I barerly see them. Why?

[haz367]

Originally Posted by nick64 well I can't solder but my father can and very well. I will ask his help. So if he solder it is it going to be alright and i will just follow the instructions? I will ask his help after returning from work and i will post here if i have the same problme.

when i read this..man i miss my dad...he was a multi know-how..could fix anything......oh well all the drama aside...hope u get it fixed..those pesky connectors are soft and need carefull removal as u have noticed

[donkey-punch]

Originally Posted by nick64 also i want to ask somethin more. I saw this video http://www.youtube.com/watch?feature...&v=WHNw2E4tU6c (to see the steps after the e3 flasher part) and at this time in video it shows the lights 10:14. My lights from e3 flasher is exactly the same except the blue ones. They aren't so bright. I barerly see them. Why?

poor connection from clip to chip. You need more pressure on the clip. E3 flasher gets power from nor chip so if your's are dim you need a better connection. Hope this helps.

[nick64]

Originally Posted by haz367 when i read this..man i miss my dad...he was a multi know-how..could fix anything......oh well all the drama aside...hope u get it fixed..those pesky connectors are soft and need carefull removal as u have noticed

yeap... you are very right! He can do anything (I don't know how )
I am sorry for your dad...
I hope to fix it to
************* [ - Post Merged - ] *************

Originally Posted by donkey-punch poor connection from clip to chip. You need more pressure on the clip. E3 flasher gets power from nor chip so if your's are dim you need a better connection. Hope this helps.

Well the first time didn't even worked. I turn it upside down and now it works but the blue lights aren't so bright. I had used very strength and I applied some tape... I will do it again.

[haz367]

haha same here...we must have some DNA from it right?
anyway....i'm sure it gets fixed..then finally join the cfw club

[donkey-punch]

Originally Posted by nick64 yeap... you are very right! He can do anything (I don't know how ) I am sorry for your dad... I hope to fix it to ************* [ - Post Merged - ] ************* Well the first time didn't even worked. I turn it upside down and now it works but the blue lights aren't so bright. I had used very strength and I applied some tape... I will do it again.

Tape on it's own won't quite cut the mustard I'm affraid. What is the board number??