[haz367]

and what about restoring/fixing the DRL/CRL hashes using multiman's option:
Fix broken blu-ray movie playback

the inception disc should have worked? if it was the last/highest toc? played on that drive...either way try that option before re-marry..she might say NO this time

[underwurlde]

OK tried it again.

After re-installing 3.55 ReMarry, did not come out of FSM.

Bunged in Inception, which then attempted to auto play. On-screen message:
"This video cannot be played"
With the error code 80029962 below that message.

Come out of FSM & reboot PS3. Get same message / error code when attempting to play.

Andy
************* [ - Post Merged - ] *************

Originally Posted by haz367 and what about restoring/fixing the DRL/CRL hashes using multiman's option: Fix broken blu-ray movie playback the inception disc should have worked? if it was the last/highest toc? played on that drive...either way try that option before re-marry..she might say NO this time

OK, will try MultiMan too.

Cheers,

Andy

[baileyscream]

@haz367
i have tried the 2x fsm dehash and allways get rlod
i used the 3.55ofw from the wiki (when the download section was up)

i have also tried 3.55nobdnobt version and still rlod

it will try to install it the first time but it turns off after 5/10 mins. (been awhile since i last did it)
read the txt and it fail's about half way in.

on the #psdowngrade channel i was told it was a permi brick with no fix.
after a few days of looking online and getting nowhere master737373 told me to just re-flash and use QA to de-hash

since then i have had this on all slims and phats i have done. none have had any luck with 2x fsm

i took it out of my guide when i started getting loads of p/m's about it happening to others.

if your friend is using this on all his downgrades with no problem at all then can you ask him to get in touch i would love to get to the bottom of why it wont work for me

[haz367]

i understand..and must admit having the same when trying once on NOR, it wont take the OFW355 for some reason(= blinking gr led) so it must be a hit&miss, the guy Mushy that fixed some told me he used FSM always to finish the downgrade but again the NAND theat came back had "qa_toggle" installed

here's the quoted message:


Once the mode is set for Double NAND, you can use Infectus NAND Programmer software which is specificly for this purpose. You may need to install the Libusb drivers (included) for the software to connect to the programmer.

When I downgrade consoles I don't use any QA flagging method - Once the initial patch is flashed (by hardware) the rest can be done via Factory Service Mode (Lv2diag.self + 3.55 PUP)

i strongly want to believe those guys over at ps3devwiki aint taking the piss with us and the info about "dehashing" is correct

http://www.ps3devwiki.com/wiki/Downg...sher#Dehashing

Remarks ReFSM way is strongly recomended over QA if you do NOT install a nonpatched firmware Both ways require installing nonpatched firmware to dehash syscon bank. QA-flag can be removed/reset after succesfull dehash, without bricking.

i don't get it for real......if i think about it that guy master???????.... came along claiming the irc guys told that e3_downgrade.bin vs patched flash, that the last is recommended...also bull if doing just a E3 downgrade, for fixing etc it's another story, alot of miscommunication, i think we may call this a quit and go with our ways = toggle_qa way as its tested and verified working..always....so i'm gonna eat my words and forget what i wrote....if the masters can proof us wrong....i'm sure they do or not? i guess we have to go onto the irc...meh it's all good for me, at the end i think those guys can't have it u put such a detailed guide on hax, like that bwe guy claiming it bricks....funny guys...although my attempt at making a joke about the grinder was more funny right?