[man ineed help]

Originally Posted by playerkp420 Press the button on the back of the esata station. It is called POWER. A light will magically appear, and the drive will have power. Then as long as you have the esata cable connecting it to the flasher, that is plugged into the hdd slot. You will be good.

stop actin like a smart ass because i do have it connected and powered on. so go somehwere

[playerkp420]

Originally Posted by man ineed help stop actin like a smart ass because i do have it connected and powered on. so go somehwere

Then check the connections.

[jamesst20]

Maybe the E3 Nor Flasher is not correctly pushed in the hard drive slot? Maybe the wire is not correctly plugged. There is really nothing else I could see, try to put the hard drive in the PS3 and see if it fixes

Envoyé depuis mon Nexus 7 avec Tapatalk

[katsuru]

Originally Posted by man ineed help stop actin like a smart ass because i do have it connected and powered on. so go somehwere

You joined the forum seeking for help, you got the attention of one of the most experienced users around here which happens to be @playerkp420 , and thats how you reply to users helping you?

you tried to flash a console without making sure your ****ing Dump was 100% OK! Which means you are not intelligent at all, which leads us to think you are a person capable of forgetting to power up eSata stations.

Please dont get me wrong but just the fact that you did not even check your dump, makes us KNOW that you were not prepared to make this procedure, next time just make sure you get everything straight before you unplug the power cord of your ps3 and think about opening it.

[Mr.Dutch]

^^ post was very helpfull.

[noobzega]

True @playerkp420 if that dont help then just connect HDD in PS3 HDD slot and E3 cable to E3 flasher, E3 gets power from NOR chip on PS3 motherboard.