[TonyTonyChopper]

i'm truly sorry to bother you but i didn't solve my problem yet! :'(


I don't know it it can help or not but would you be so kind to post me an untouched dump of 4.30 ofw?
i just need the "pf" part so if you like you can send me that part only
http://www.ps3devwiki.com/wiki/Flash


please, i'm testing everything i can! ç__ç

[arloubas]

Hello all!
I have a fat CECHG04 PS3 which I bricked after trying to upgrade from 3.55 Kmeaw to Rogero's 4.21 CFW.
After following Bailey's guide (dumped the flash with Progskeet 1.2, verified the dump, patched the dump and flashed it back) I got to the point where I connected my PS3 to the TV and I should see the message "Connect your controller". Instead of this I get the RLOD (a brief flash of yellow LED followed by a blinking red LED) IMMEDIATELLY after turning the PS3 on.
Can anyone explain why does this happen?
The fact that I get the RLOD means that I got out of the bricked situation that I was in?
Could this be because I applied too much thermal paste on the CPU and GPU? If this is the problem, shouldn't the RLOD happen after some time has passed and not IMMEDIATELLY after turning my PS3 on?

Thanks.

[jensen76]

i have a problem whit my nand consol CECHG04....

my dump is okay but when i flash the 2 dumps back to the ps3 i get Verifikation error on block 668 no mather what i do (bottom nand).. but only on the modified dump and not on my original dump..

if i use the modified dump i get yellow light and ps3 goes dead but if i flash my original dump Everything works just fine..

Does anyone have an idea what could be wrong?

[Sarah1331]

Originally Posted by jensen76 i have a problem whit my nand consol CECHG04.... my dump is okay but when i flash the 2 dumps back to the ps3 i get Verifikation error on block 668 no mather what i do (bottom nand).. but only on the modified dump and not on my original dump.. if i use the modified dump i get yellow light and ps3 goes dead but if i flash my original dump Everything works just fine.. Does anyone have an idea what could be wrong?

If your orig works and your console boots

Delete all modifyd images and try make new ones again


Sent from my iPhone 5 using Tapatalk

[Sarah1331]

Originally Posted by arloubas Hello all! I have a fat CHCG04 PS3 which I bricked after trying to upgrade from 3.55 Kmeaw to Rogero's 4.21 CFW. After following Bailey's guide (dumped the flash with Progskeet 1.2, verified the dump, patched the dump and flashed it back) I got to the point where I connected my PS3 to the TV and I should see the message "Connect your controller". Instead of this I get the RLOD (a brief flash of yellow LED followed by a blinking red LED) IMMEDIATELLY after turning the PS3 on. Can anyone explain why does this happen? The fact that I get the RLOD means that I got out of the bricked situation that I was in? Could this be because I applied too much thermal paste on the CPU and GPU? If this is the problem, shouldn't the RLOD happen after some time has passed and not IMMEDIATELLY after turning my PS3 on? Thanks.

Cechg does not turn on and say connect controller
It should turn its self off no beeps
If it does this trigger fsm


Sent from my iPhone 5 using Tapatalk

[arloubas]

Originally Posted by Sarah1331 Cechg does not turn on and say connect controller It should turn its self off no beeps If it does this trigger fsm Sent from my iPhone 5 using Tapatalk

It does not turn off, it beeps and it goes into RLOD (blinking red LED).

[Sarah1331]

Can you post your dump to

dumpcheck @hotmail .co.uk


Sent from my iPhone 5 using Tapatalk

[jensen76]

Originally Posted by Sarah1331 If your orig works and your console boots Delete all modifyd images and try make new ones again Sent from my iPhone 5 using Tapatalk

tryed that 3 times and whit diferent flowrebuilder and same thing happens.. error on 668 bottom nand.

[Sarah1331]

Originally Posted by jensen76 tryed that 3 times and whit diferent flowrebuilder and same thing happens.. error on 668 bottom nand.

You don't get error flashing orig NAND
Does it turn on with orig nand


Sent from my iPhone 5 using Tapatalk

[arloubas]

Originally Posted by Sarah1331 Can you post your dump to dumpcheck @hotmail .co.uk Sent from my iPhone 5 using Tapatalk

OK I will do it.