[modshot]

video link:
tinypic.com/r/333e2k0/6


i was downgrading my ps3.
then i used Lv2diag.self to get out of the fms. and the ps3 just turned off. and when i tryed to turn it on this happend. i have a e3 reader and a e3 flasher. annybody know how to fix this??

[MJ999]

Originally Posted by modshot video link: tinypic.com/r/333e2k0/6 i was downgrading my ps3. then i used Lv2diag.self to get out of the fms. and the ps3 just turned off. and when i tryed to turn it on this happend. i have a e3 reader and a e3 flasher. annybody know how to fix this??

You are still on FSM.

[donkey-punch]

Originally Posted by modshot video link: tinypic.com/r/333e2k0/6 i was downgrading my ps3. then i used Lv2diag.self to get out of the fms. and the ps3 just turned off. and when i tryed to turn it on this happend. i have a e3 reader and a e3 flasher. annybody know how to fix this??

As @MJ999 stated you are still in fsm, you need to use the other lv2.diag file to exit. You should've had 2 files named the same, you need to use the smaller one to exit.

[modshot]

Originally Posted by donkey-punch As @MJ999 stated you are still in fsm, you need to use the other lv2.diag file to exit. You should've had 2 files named the same, you need to use the smaller one to exit.

So i put that file on a usb stick and put it imot The right usb port? And just press start? Can u give me a link to fsm EXIT ? And i will try it and make another video !

[haz367]

Originally Posted by modshot So i put that file on a usb stick and put it imot The right usb port? And just press start?

proper exit lv2diag.self >
http://rghost.net/43093897

remove all files from USB and place only this file on root of USB
put in right slot and hit the power button 1 time, wait for shutdown
boot normal and re-install the same PUP via the recovery, make new backup..check it, qa flag it and dehash with OFW355

[modshot]

Wont work when i put in The usb with The file in The ps3. it takes abouth 6 sec for ps3 to Load The file, and ps3 autoturn off after 5...
************* [ - Post Merged - ] *************

Originally Posted by modshot Wont work when i put in The usb with The file in The ps3. it takes abouth 6 sec for ps3 to Load The file, and ps3 autoturn off after 5...

I readed some posts on The forum that i can try somthing with a "tristate" or somthing, can somebody give me a short TUT how i do it?
I have a E3 flasher solderless ?!

[Mr.Dutch]

Originally Posted by modshot I readed some posts on The forum that i can try somthing with a "tristate" or somthing, can somebody give me a short TUT how i do it? I have a E3 flasher solderless ?!

what model do you have...
if you solder this tristate to ground the ps3 will halt on bootup, and should stay on if it's a flash problem.
if it's hardware related it will still shutdown.

BTW, in the vid it looks like the fan is still running when the console shuts down, or am i not looking good enough.

[modshot]

its not running

[haz367]

Originally Posted by modshot Wont work when i put in The usb with The file in The ps3. it takes abouth 6 sec for ps3 to Load The file, and ps3 autoturn off after 5...

i don't no the problem..sorry, but what u describe here sounds good to me for "exit" out of FSM, it shouldn't triple beep or whatever..just goes off nice and quit = good

[modshot]

anny body know how i can tristate it ?1