[jensen76]

Originally Posted by Sarah1331 You don't get error flashing orig NAND Does it turn on with orig nand Sent from my iPhone 5 using Tapatalk

original nand dumps no error at all flashing it and consol boots like normal all is working.but not whit modified nand yellow light and goes dead and gives error on 668 when flashing the bottom nand only not the top nand.tryed to flash bottom nand 5 times in a row to se if i could get past the error but no no it happens no mather what i try... tryed the bottom nand whit bouth my nand clips and they are bouth giving the error on the modified nand...

dont know what the hell is wrong.ore what to try next..

[arloubas]

Judging from jensen76's previous posts, can the RLOD happen due to an invalid dump? I thought the RLOD happened due to overheating.

[TonyTonyChopper]

sorry, wrong thread

[haz367]

u also get RLOD when flashed back invalid dump = triple beep..blinking red lights
green-orange-red blinking led-hold powerbutton a little longer to shutdown can be a bad dump for sure..

[arloubas]

Originally Posted by haz367 u also get RLOD when flashed back invalid dump = triple beep..blinking red lights green-orange-red blinking led-hold powerbutton a little longer to shutdown can be a bad dump for sure..

"green-orange-red blinking led-hold powerbutton a little longer to shutdown": this is exactly the state which I am in.
So I screwed up? I will be waiting for someone to check my dump, let's hope it's not too late...
Anyway, before trying to upgrade to Rogero CFW 4.21, I made a backup of my 3.55 Kmeaw flash with multiman. Nevertheless, this 3.55 Kmeaw dump lacks the bootloader (it has something to do with the Hypervisor masking it when in CoreOS). Is there something that I can do to flash back my original 3.55 Kmeaw dump? Perhaps fill this 3.55 Kmeaw dump with the bootloader data from the Rogero 4.21 CFW flash dump?

[haz367]

ur on NAND correct, softwaredumps/NANDS are missing 1 piece of the bootloader_0, with a hardwareflasher it got both right....i can't really help there as i only messed with NOR but the symptoms are obviously a bad flash and DITCH the 4.21 one as it can a bricker, use the latest from Rogero if u decide to use it not the 4.21 one for sure, i had a brick on the same CFW back then..something with slow loading XMB..corrupt data errors, it was ROS0/1 on NOR flash being bad/corrupt and only way to fix was restoring via hardwareflasher, now i cannot recall what backup i used to restore, i think it was default OFW with patched coreos, but some bricks are not alike e.g with Rebug 4.21.1(user fault here!!) but it only restored using a pre-made backup of REX 4.21.1, for example a patched one didn't work = triple beep off, to bad i always forget to write down any notes about fixing, and finally for NAND software dump and missing 1 of the bootloaders can be fixed by putting that other piece back in that dump or something like that.....for that part u'll need the pro's to fix it up

goodluck

[arloubas]

Originally Posted by arloubas "green-orange-red blinking led-hold powerbutton a little longer to shutdown": this is exactly the state which I am in. So I screwed up? I will be waiting for someone to check my dump, let's hope it's not too late... Anyway, before trying to upgrade to Rogero CFW 4.21, I made a backup of my 3.55 Kmeaw flash with multiman. Nevertheless, this 3.55 Kmeaw dump lacks the bootloader (it has something to do with the Hypervisor masking it when in CoreOS). Is there something that I can do to flash back my original 3.55 Kmeaw dump? Perhaps fill this 3.55 Kmeaw dump with the bootloader data from the Rogero 4.21 CFW flash dump?

Originally Posted by haz367 ur on NAND correct, softwaredumps/NANDS are missing 1 piece of the bootloader_0, with a hardwareflasher it got both right....i can't really help there as i only messed with NOR but the symptoms are obviously a bad flash and DITCH the 4.21 one as it can a bricker, use the latest from Rogero if u decide to use it not the 4.21 one for sure, i had a brick on the same CFW back then..something with slow loading XMB..corrupt data errors, it was ROS0/1 on NOR flash being bad/corrupt and only way to fix was restoring via hardwareflasher, now i cannot recall what backup i used to restore, i think it was default OFW with patched coreos, but some bricks are not alike e.g with Rebug 4.21.1(user fault here!!) but it only restored using a pre-made backup of REX 4.21.1, for example a patched one didn't work = triple beep off, to bad i always forget to write down any notes about fixing, and finally for NAND software dump and missing 1 of the bootloaders can be fixed by putting that other piece back in that dump or something like that.....for that part u'll need the pro's to fix it up goodluck

Thanks. Is there any NAND-expert who can help me with this?

[donatelo27]

help me
i have a ps3 fat CECHJ03 3.55 kmeaw accidentally updated OFW 4.31
how to downgrade to 3.55?
I have a friend will borrow e3flasher
thanks

[jensen76]

Originally Posted by donatelo27 help me i have a ps3 fat CECHJ03 3.55 kmeaw accidentally updated OFW 4.31 how to downgrade to 3.55? I have a friend will borrow e3flasher thanks

take a look at page 1

[donatelo27]

Originally Posted by jensen76 take a look at page 1

ok
I've read page one but confused
whether the process is same the downgrade OFW 3.73 / 4.11 / 4.21 / 4.31?
if the same I will immediately process it
thanks